1 / 3
Werner's Sovol Zer0 Nozzle Neopixel LED Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple LED Mount for the Zero Toolhead
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 32
- Makes
- 0
- Views
- 277
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
A simple LED mount for the Zero toolhead.
Print it in ABS or ASA. Mount it using the holes for the additional back fan with two M3×6 screws. (You may need to trim the factory tape for the Eddy probe.)
You can use any LED macro you like, or simply copy and paste mine into your printer.cfg if you only want white light.
[neopixel hotend_rgb]
pin: extruder_mcu:PC14
chain_count: 1
color_order: GRBW
initial_RED: 0.3
initial_GREEN: 0.3
initial_BLUE: 0.3
initial_white: 0.3BOM:
Neopixel: https://s.click.aliexpress.com/e/_c3nlbEwd
M3x6: https://s.click.aliexpress.com/e/_c3TzZoH3