GMKtec NucBox5 dovetail Vixen / Losmandy mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting plate to mount the GMKtec NucBox5 mini pc to a dovetail Vixen / Losmandy plate
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 1
- Views
- 174
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Share Alike
This is a mounting plate for the GMKtec NucBox5 mini PC. The mini PC has two M2 screw holes on the bottom, which I use to attach the plate. The plate itself provides two positions for M4 hexagon nuts, allowing it to be mounted with the mini PC onto either a Vixen dovetail rail or a Losmandy plate.
The mounting plate itself has a thickness of 4 mm. Keep this in mind for your M4 bolt length.
Required hardware:
- 2x M4 hexagon nuts
- 2x M4 bolts (the length depends on our dovetail Vixen rail / Losmandy plate)
- 2x M2 bolts (ideal: 5 mm; 4-6 mm work fine)
- 2x M4 washers
I didn't have the proper M4 bolts on hand, so I used nuts as spacers. For my bolts, the washers were necessary because the heads weren't wide enough. M5 or M6 bolts would have been ideal, but M5/M6 nuts are much thicker, which would have resulted in an even thicker plate.
