simple Disc golf glow charger - LED UV/reg. light strip 5V - cut to length
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It work with regular or UV LED stripes of 5V and easy to carry around with a battery pack (1-5mm Hx 8mm Wx 70mm+)
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 9
- Makes
- 0
- Views
- 247
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It works with LED stipes of 8mm width by 70mm long and up. Thickness can be from 1mm to 4-5mm. The ring in 3 parts snaps in place (you can glue it with contact (ca) glue). Also the optionnal clips allows to secure the usb cable and extra length (my strip is 100mm and I did not want to cut it down to 70mm). (*edit: its easier to just cut the strip to the desired length), You can use any 5v (easy with PD phone and camera chargers) LED strip that are 8mm wide and 2mm thick. I printed it in PETG
Print settings
Nozzle size ......................... 0.4 mm
Layer height ....................... 0.2
Number of perimeters ... 2 (or more)
Infill ...................................... 15% (or more)
Supports ............................. yes
Bed surface ......................................... glue stick + brim (if PLA)
Hotend temp ...................................... 240c / 210
bed temp .............................................. 80c / 60
Materials used: .................................. PETG / PLA
Additionnal parts
LED strip 8mm wide x 2mm thick x 700mm long
Glowing disc and power source