1 / 8
Arasaka Dice Tower - no supports, no glue — image 1
1 / 8

Arasaka Dice Tower - no supports, no glue

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix that eliminates the need for supports, and parts fit through pegs, eliminating the need for glue.

Rating
5 / 5
Likes
24
Downloads
115
Makes
2
Views
640
Reviews
2

Updated at source:

Model information

Category
Board Games
License
Creative Commons — Attribution

 

Remix of a model published here on Printables by user @Sable , from the original publication:

Dice tower based off of Cyberpunk 2077 and Edgerunners' Arasaka Tower

Prints in three parts, required print dimensions 200x200x250mm 

Contribution by Dany Sánchez of MiniWorld3D:

  • Added angle chamfers to eliminate the need for supports.
    The only overhang is at the opening where the dice come out of onto the tray, which is a long bridge but perfectly printable without supports by modern printers with good cooling and speed.
     
  • Added pegs, so that parts fit with each other, eliminating the need for glue.
    You can still use glue for a more secure and permanent fix, the pegs allow for perfect alignment of parts.  Depending on the filament, the printer and your settings, the fit may be a bit loose or a bit tight, due to the nature of tolerances. Sanding or shaving with a knife may be needed for a good fit. 
     
  • Added 3MF for ElegooSlicer that includes optimized settings 
    See slicer screenshots further below.
     

Print credits: by Johnny Bland on an Elegoo Centauri Carbon, Prusament Galaxy Black PLA, and the settings shown below.

Print settings -------

  • No supports
     
  • No brims
     
  • Recommended 0.28 mm layer height, 15% lightning infill, seam position “back” 
     
  • The logo can still be printed separately and pause-to-change filament color  in order to have a black background and a white logo.
     

Tags