1 / 3
Waveshare ESP32-P4-NANO case and board model
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple box-shaped enclosure for the ESP32-P4-NANO by Waveshare. Choose from a hex-grid or solid top. Uses M2x7 screws.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 220
- Makes
- 1
- Views
- 823
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a simple case for the ESP32-P4-NANO by Waveshare.
I couldn't find any suitable model for download, so I created my own.
It allows for access to the header pins (except for the POE one), speaker and RTC-connectors, camera and display FPC/FFC-ports, the boot and reset buttons, SD-Card slot, USB-A, USB-C and RJ45 ports.
Assembly requires four M2x7mm screws. You might get away with 10mm long ones to.
The measurements may not be 100% accurate, so feel free to tweak as needed.
- PLA
- 0.15mm
- Supports only for the SD-Card cutout, or just trim the bridge away.