Core One+ Flush Spoolholder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.38 – €1.69 net (excluding VAT)
For file: core-one-plus_flush-spoolholder_0.4n_0.2mm_PETG_COREONE_1h15m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.54 excluding VAT (range midpoint).
- Weight reported by the author
- 27 g
- Print time reported by the author
- 1.25 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Shorter CORE one+ spoolholder that is flush with the side panel, still fits 1kg Prusament spools.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 72
- Makes
- 2
- Views
- 557
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
The default Prusa CORE One+ spoolholder is longer than the side panel, which is aesthetically not very nice. This version is shorter, so that the the spoolholder is flush with the side of the CORE one+.
Standard Prusament 1kg spools still fit, most-likely most of the other filament brands will still fit too. 69.9 mm is the maximum supported spool width.
Print using the same settings as the original:
PETG
Layer height: 0.2 mm
Infill: 20%
Infill pattern: Grid