Craftsman Versatrack to MultiBin Adapters
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows hanging MultiBin Shells from Craftsman Versatrack.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I built a water proof backsplash for my garage sink out of craftsman versatrack rails. I wanted to hang various boxes for holding sponges, brushes and other items from the rails. I went with MultiBins from Multiboard since they already existed and would save me some design time.
The two adapters click into the rail and let you hang multibin shells, boxes, from the rail. The adapters are specific to the top and bottom of the rail and click into place with some moderate pressure. The center to center spacing is not compliant to the multipoint standard but optimized to for printing without support.
There is built in brim you need to cut off at after the print. No other brim or support is needed.
F360 files included for modification if you need it.