P
Printables
1x1 Multibin Top Volcano Nozzle Holder
1x1 Multibin Top remixed to hold 16 Volcano nozzles
Search results: multibin
Counting matching models…
P
Printables
Multibin 3x3x0.5h Apple Barrel paint container - holds 13 paint containers
This is a Multibin for Multiboard container > 3x3 x 0.5 height for the Apple Barrel (appleBarrel) paints, but also works for most other paints - just will be too large for the Valejo sets. This is for 13 paints
P
Printables
Tea Lights Multibin Insert
This Multibin Insert holds 12 tea lights, their charging cables and the remote. You can use it on its own or add a 4x3 LU Multibin Shell to fit into the grid or if you need to stack it (1.5 LU height). Print Settings Use the typical…
P
Printables
2x2 Multibin Support
These are support structures for 2 wide Multibins based on KeepMaking's Multiboard . Putting an insert into a Multibin to act as a shelf is useful in many cases, but attaching the bin only in the back makes them pretty wobbly. These…
P
Printables
1x1 CU - LR44 - Multibin Top
This is a 1x1 Multibin Top to hold up to eight LR44 batteries. Additional Parts Since this is only a Multibin Top you need extra parts. Please note that the following links might get outdated if parts are updated on Thangs. Use the…
P
Printables
1x1 CU - CR2450 - Multibin Top
This is a 1x1 Multibin Top to hold up to five CR2450 batteries. Additional Parts Since this is only a Multibin Top you need extra parts. Please note that the following links might get outdated if parts are updated on Thangs. Use the…
P
Printables
1x1 CU - CR2032 - Multibin Top
This is a 1x1 Multibin Top to hold up to six CR2032 batteries. Additional Parts Since this is only a Multibin Top you need extra parts. Please note that the following links might get outdated if parts are updated on Thangs. Use the…
P
Printables
MultiBin Spice Rack
Hey, I recently designed these MultiBin compatible spice racks to get my kitchen at least a little bit more organized. Printing: These models are as easy as it gets to print. Just use the settings that work best with your printer. No…
P
Printables
AA Batteries Holder - 1x1x0.5 LU - Multibin Insert
This is just a basic AA batteries holder for Multibins. There are other variants around, but I needed one quickly and was playing around in FreeCAD anyway. You can use it on its own or add a 1x1 LU Multibin Shell to fit into the grid or…
P
Printables
MultiBin Top for Pinecil and TS100
Keep your soldering iron and spare tips organized in a compact 1x1 bin. This is a MultiBin Top designed for the MultiBuild system. Compatibility The handle dimensions should be identical between generations, so these variants cover both:…
P
Printables
Multibin tool holder (SV06)
Multibin insert (1x1x1.5) to hold the tools provided with the Sovol SV06 and many other printers. Best use would be to put it in a 1x1x1.5 MultiBin shell and mount that on your wall. But it can be free standing. This is fully compatable…
P
Printables
Revo Multibin Insert Top
Hold 2-6 Revo nozzles in a Multibin insert with this topper Pair it with a 1x1x.75H insert or a 1x1x1H insert and a Multibin shell Suggest printing upside down for best results
P
Printables
Multibin Top - Miniature Paint Holder
This is a bin top for Multiboard's Multibins to accomodate miniature paints like these: Vallejo Air (26mm version) Citadel (34mm version) Vallejo Model Paint (37mm version) For now I only made a 4x1 version with a different number of…
P
Printables
2x2x0.75 - Multibin Insert for paint bottles
Multibin Insert that holds 25 mm paint bottles like Warpaints and brushes. This insert fits a 2x2x0.75 and 2x2x0.5 Mult
P
Printables
3x2x0.75 - Multibin Insert for paint bottles
Multibin Insert that holds 25 mm paint bottles like Warpaints and brushes. This insert fits a 3x2x0.75 and 3x2x0.5 Mult
P
Printables
4x2x0.75 - Multibin Insert for paint bottles
Multibin Insert that holds 25 mm paint bottles like Warpaints and brushes. This insert fits a 4x2x0.75 and 4x2x0.5 Mult
P
Printables
Multibin Exacto Top 1x1
Exacto knife holder for 1x1x2 multibin shell. You will need to print the Top Click Rim as well. Print face down w/o supports.
P
Printables
Rugged Multiboard MultiBin compatible Box (different sizes)
Rugged boxes compatible with MultiBin accessories. I have added an additional set of lids that can be used with the drawers. Additional hardware required: 2 * M2x20 Screw 4 * M2x30 Screw 2mm rubber seal MultiBoard System:…
P
Printables
Loctite 10ml Multibin Top
Multibin Top for 3 pcs Loctite 242, 243. I have only chinese fake LOCTTLF versions and I hope that size fits for original too. 29 mm version is easy to remove. 28 mm is tight to bottle.
P
Printables
Multibin - Multipoint 3x5 Notepad Holder
Holds a 3x5" notepad and pen comfortably. I used 4 multipoints so it doesn't wiggle around.
P
Printables
Multiboard/Multibin Gorilla Glue Top
Multiboard/Multibin Tops for the 15g and 10g Gorilla Glue bottles. Made for Multibin Full Shells or Multibin Topped Shells attached with Top Click Rims . Credits to Jonathan (YouTube: @Keep-Making , @multiboard_io ) for creating…
P
Printables
Multibin Bambu Scraper Holder
This is a remix/inspired by the official Bambu Lab Scraper Grip. I first printed the official one but then Multiboard released their new multibin series and I wanted to try it out. So I made this model. The original idea was to adapt this…
P
Printables
Multibin Top for Dremel Sharpener Kit
Multibin top for dremel bits modifiied for the Dremel Sharpening Kit. It now has slots to hold the gauge and shims. You will need the top rim to insert into the Multibin Shell.
P
Printables
1x1x1 - Bin - Multibin Insert Rounded Bottom
A 1x1x1 Multibin Insert with a 10 mm internal front fillet for easier scooping of content
P
Printables
Multibin 1x1 Drop-In 4-Grid Lid
A 1x1 Multibin Lid with a separation grid for ease of organization.
P
Printables
Multibin 1x1 Drop-In 4-Grid Lid v2
A 1x1 Multibin Lid with a separation grid for ease of organization. This version has a “deeper” cross-member for increased durability and separation.
P
Printables
Multibin 1x1 - Drop-In Needle File Lid
This is a parametric Multibin lid to hold needle files. The parametric values are: Number of files Handle diameter Multibin height (0.5 or 1 recommended) I recommend choosing your bin height based on the length of the file handles. The…
P
Printables
Multibin 1H 30-Degree Lite Multirail Interface
A Lite Multirail interface for attaching 1H-height Multibins, etc., at a 30-degree angle to a Multiboard. Accessories with Lite Multirails will snap into place for a secure hold. Print using standard Multiboard settings (0.2 mm layer…
P
Printables
Multibin 1H 30-Degree Push-Fit Interface
A Push-Fit interface for attaching 1H-height Multibins, etc., at a 30-degree angle to a Multiboard. Accessories with Lite Multirails will snap into place for a secure hold. Print using standard Multiboard settings (0.2 mm layer height, 3…
P
Printables
Improved Multibin 1x1 - Drop-In Needle File Lid
This is an improved version of my original Multibin 1x1 - Drop-In File Needle File Lid. The design is a parametric 1X1 Multibin lid with holes and bosses to hold needle files. The parametric values are: Number of files Handle diameter…
P
Printables
Multiboard/Multibin Pinecil Tops
Made for Multibin Full Shells or Multibin Topped Shells attached with Top Click Rims . Credits to Jonathan (YouTube: @Keep-Making , @multiboard_io ) for creating multiboard/multibin/multipoint . Made with FreeCAD. My first attempt at…
P
Printables
Multibin 1x1x1 Wisblock Holder
A simple Multibin insert for holding three RAK Wisblock 19007 boards when doing firmware updates, etc. The three boards are stacked height-wise so that the battery and solar panel connectors are not obscured by the board in front, and the…
P
Printables
2x1x2-Deep - Grid Double-Divided - Multibin Drawer
This is a modification of the Grid Divided Multiboard MultiBin. Like the Grid Divided Simple MultiBin drawers from Keep Making , but with twice as many compartments. This is a 2 wide, by 1 high, by 2 deep MultiBin Simple drawer with a…
P
Printables
3x1x2-Deep - Grid Double-Divided - Multibin Drawer
This is a modification of the Grid Divided Multiboard MultiBin. Like the Grid Divided Simple MultiBin drawers from Keep Making , but with twice as many compartments. This is a 3 wide, by 1 high, by 2 deep MultiBin Simple drawer with a…
P
Printables
1x1x0.5 - Angled CR2032 Battery Holder - Multibin Insert
Multibin insert capable of holding (8) CR2032 batteries, and whatever else fits in the tray. I don't recommend using this model. The batteries are difficult to eject and the model consumes more filament than is really necessary. Try this…
P
Printables
1x1 CR2032 Battery Holder - Multibin Top
Multibin top designed to hold (6) CR2032 batteries. Batteries can easily be ejected by rolling them laterally out of their slots.
P
Printables
1x1 CR123A Battery Holder - Multibin Top
Multibin top designed to hold (4) CR123A batteries.
P
Printables
1x1 9v PP3 Battery Holder - Multibin Top
Multibin top designed to hold (2) 9V PP3 batteries. You might think the slots need to be deeper to envelop more of the battery, but that would require more vertical clearance in order to remove the batteries from the slots. The slot depth…
P
Printables
3x1 - 30 x 1 ml vial holder - Multibin top
A simple yet cool way to hold many 1 ml vials for storing on a multiboard or gridfinity. I belive that someone would find this helpful.
P
Printables
3x1 - Manga Marker 12-Pen Multibin Top
A remix of the 3x1 - Multibin Top to hold a 12-piece set of Sakura Micron Manga markers, or this Chotune set as sold on AliExpress . The lid is also marked with corresponding pen size, to easily identify which pen is missing. This top…
P
Printables
3x1 - Manga Marker 12-Pen Drop-In Multibin Lid
A remix of the 3x1 - Unversal Drop-In Lid to hold a 12-piece set of Sakura Micron Manga markers, or this Chotune set as sold on AliExpress . The lid is also marked with corresponding pen size, to easily identify which pen is missing. From…
P
Printables
1x1x1 - Multibin Nail Clipper Insert
Simple Multibin Insert to hold a finger nail clipper. It will go inside a Multibin shell. The center hole is 13x15mm.
P
Printables
1x1 Multibin Top Volcano Nozzle Holder
1x1 Multibin Top remixed to hold 16 Volcano nozzles
P
Printables
Creality Vacuum Pump insert for Multibin
Multibin insert to hold the Creality Vacuum Pump with no need to detach the bag adapter. Two versions included, one with holes for the accessories and charging cable and one with just the hole for the pump itself. Fits in a 2x2x1 Multibin.
P
Printables
2x1 Multibin Top - 12x 608RS Bearing
This is a 2x1 Multibin Top designed to store twelve 608RS bearings. It can be placed on a standalone Multibin Insert (0.5H is sufficient - 2x1x0.5 - Bin - Multibin Insert - 3D model by Multiboard on Thangs ) and inserted into a Multibin…
P
Printables
3D Pen multibin insert
A simple insert for Multibin to hold a 3D pen in a compact way. The insert fits into a 1x2 bin. For a full setup print: this model a 1x2 Micro Multibin Shell 4 x Multibin Insert Pin Printing instructions The parts are designed to be…
P
Printables
3D Printable Multibin Speaker Works with Multiboard Environment
This is a speaker enclosure designed to work with the multi-board environment, meaning it will attach to your walls and add spaces for additional bins to attach to it. BOM: 2 - https://s.click.aliexpress.com/e/_oB0EJqW 15-60w 3 inch…
P
Printables
4x3 - Multibin Top - Bambu Labs H2D Parts Tray
A top for the 4x3 Multibin that holds the Bambu Labs H2D Parts tray, the filament swatches, and 2 extra hotends
P
Printables
1x1 - Multibin Top - Funnel
Simple funnel for the Multibin 1x1 system as Multibin Top. Learn more about the system: https://multiboard.io
P
Printables
Multibin Snap-in Lid
Multibin Click-in Lid (1x1, 2x1, 3x1) Secure your Multibin contents with these Multibin Click-in Lids, now available in 1x1, 2x1, and 3x1 sizes! The lids combine the simplicity of a drop-in lid with the secure, satisfying click of a Top…
P
Printables
Multibin Insert for YATO YT-6161 – Needle File Set
This is a 4x2x0.5 CU insert for a set of six YATO needle files (160 x 75 mm). The side for the handles is deeper, so you can press on the handle for the business end to come up, making it easier to grab. Either paint the markings in your…
P
Printables
Multibin Screws and heatset inserts storage drawers
My Thanks the the Multiboard Team over at Multiboard.io if you haven't checked them out then you should. all parts were printed on a Centauri carbon using Elegoo PLA Rapid Plus with standard settings. no supports are required. I will not…
P
Printables
Multibin Bearing Inserts
This is my first uploaded model so if anyone has any suggestions, let me know. I had a few different sizes of bearings rolling (pun intended) around my parts drawer, so I decided to make some custom inserts for Multibins to keep them…
P
Printables
Nextruder Nozzle Holder - Multibin Top
These are Multibin Tops to hold either three or seven Nextruder nozzles. They work with regular Prusa sized nozzles and the E3D high flow variants that have a slightly bigger head. Because they are tightly nested in the holder, I did not…
P
Printables
Multibin Drawer Thicker Label Plates
I have created this label for for the Multibin Drawers as the Plain Labels are too thin for me particularly when creating a colored text label. I have used default walls and infills but I set to 0.16mm with ironing
P
Printables
Files set holder multibin top insert
This is a insert to store a set of needle files (6pcs). 3 slots are round 3 slots are flat Designed to be used with 1U multibin insert.
P
Printables
Multibin 3x3x0.5h Apple Barrel paint container - holds 13 paint containers
This is a Multibin for Multiboard container > 3x3 x 0.5 height for the Apple Barrel (appleBarrel) paints, but also works for most other paints - just will be too large for the Valejo sets. This is for 13 paints
P
Printables
Multibin - 2x2x0.5h - Apple Barrel paint container
This is a Multibin for Multiboard container > 2x2 x 0.5 height for the Apple Barrel (appleBarrel) paints, but also works for most other paints - just will be too large for the Valejo sets. This is for the Multibin of the Multiboard…
P
Printables
Needle Files Holder - Multibin Insert Top
This is a Multibin Top to hold a collection of needle files or similar items with a diameter up to 8.5 mm. Additional Parts Since these are only Multibin Tops you need extra parts. Please note that these links might get outdated if parts…
P
Printables
Multibin 0.5H 30-Degree Push-Fit Interface
A Push-Fit interface for attaching 0.5H-height Multibins, etc., at a 30-degree angle to a Multiboard. Accessories with Lite Multirails will snap into place for a secure hold. Print using standard Multiboard settings (0.2 mm layer height,…
P
Printables
Omnifixo Multibin Top
I use this to store in a drawer, but could be used on a wall as well. Intended to be used with this click rim and this multibin
P
Printables
Craftsman Versatrack to MultiBin Adapters
I built a water proof backsplash for my garage sink out of craftsman versatrack rails. I wanted to hang various boxes for holding sponges, brushes and other items from the rails. I went with MultiBins from Multiboard since they already…
P
Printables
Crealitly Vacuum Pump Multibin Top (Improved Fit + Mechanical Mount)
Description The original Creality vacuum pump insert for the Multibin ecosystem is a great concept, but when I printed it I ran into two issues: Very tight tolerances , leading to inconsistent fit No clean way to secure the insert when…
P
Printables
Tea Lights Multibin Insert
This Multibin Insert holds 12 tea lights, their charging cables and the remote. You can use it on its own or add a 4x3 LU Multibin Shell to fit into the grid or if you need to stack it (1.5 LU height). Print Settings Use the typical…
P
Printables
2x2 Multibin Support
These are support structures for 2 wide Multibins based on KeepMaking's Multiboard . Putting an insert into a Multibin to act as a shelf is useful in many cases, but attaching the bin only in the back makes them pretty wobbly. These…
P
Printables
1x1 CU - LR44 - Multibin Top
This is a 1x1 Multibin Top to hold up to eight LR44 batteries. Additional Parts Since this is only a Multibin Top you need extra parts. Please note that the following links might get outdated if parts are updated on Thangs. Use the…
P
Printables
1x1 CU - CR2450 - Multibin Top
This is a 1x1 Multibin Top to hold up to five CR2450 batteries. Additional Parts Since this is only a Multibin Top you need extra parts. Please note that the following links might get outdated if parts are updated on Thangs. Use the…
P
Printables
1x1 CU - CR2032 - Multibin Top
This is a 1x1 Multibin Top to hold up to six CR2032 batteries. Additional Parts Since this is only a Multibin Top you need extra parts. Please note that the following links might get outdated if parts are updated on Thangs. Use the…
P
Printables
Europlugs - Multibin Insert
This Multibin Insert holds power supplies or similar items with Europlugs. You can use it on its own or add either a 1x1 or 2x1 CU Multiboard Shell to fit into the Multiboard grid. Print Settings Use the typical Multiboard print settings:…
P
Printables
MultiBin Spice Rack
Hey, I recently designed these MultiBin compatible spice racks to get my kitchen at least a little bit more organized. Printing: These models are as easy as it gets to print. Just use the settings that work best with your printer. No…
P
Printables
AA Batteries Holder - 1x1x0.5 LU - Multibin Insert
This is just a basic AA batteries holder for Multibins. There are other variants around, but I needed one quickly and was playing around in FreeCAD anyway. You can use it on its own or add a 1x1 LU Multibin Shell to fit into the grid or…
P
Printables
AAA Batteries Holder - 1x1x0.5 LU - Multibin Insert
This is just a basic AAA batteries holder for Multibins. There are other variants around, but I needed one quickly and was playing around in FreeCAD anyway. You can use it on its own or add a 1x1 LU Multibin Shell to fit into the grid or…
P
Printables
MultiBin Top for Pinecil and TS100
Keep your soldering iron and spare tips organized in a compact 1x1 bin. This is a MultiBin Top designed for the MultiBuild system. Compatibility The handle dimensions should be identical between generations, so these variants cover both:…
P
Printables
divided multibin
This builds on the https://multibuild.io/ Drawer system. The ones I use are small for small parts. And I don't like having just a few parts on the bottom of one drawer. It was a waste of space. There was not any that were divided for…