Liczymy pasujące modele…
Made for Multibin Full Shells or Multibin Topped Shells attached with Top Click Rims . Credits to Jonathan (YouTube: @Keep-Making , @multiboard_io ) for creating multiboard/multibin/multipoint . Made with FreeCAD. My first attempt at…
Multibin Click-in Lid (1x1, 2x1, 3x1) Secure your Multibin contents with these Multibin Click-in Lids, now available in 1x1, 2x1, and 3x1 sizes! The lids combine the simplicity of a drop-in lid with the secure, satisfying click of a Top…
Holds a 3x5" notepad and pen comfortably. I used 4 multipoints so it doesn't wiggle around.
Hold 2-6 Revo nozzles in a Multibin insert with this topper Pair it with a 1x1x.75H insert or a 1x1x1H insert and a Multibin shell Suggest printing upside down for best results
Hey, I recently designed these MultiBin compatible spice racks to get my kitchen at least a little bit more organized. Printing: These models are as easy as it gets to print. Just use the settings that work best with your printer. No…
A 1x1x1 Multibin Insert with a 10 mm internal front fillet for easier scooping of content
This is a insert to store a set of needle files (6pcs). 3 slots are round 3 slots are flat Designed to be used with 1U multibin insert.
This is a remix/inspired by the official Bambu Lab Scraper Grip. I first printed the official one but then Multiboard released their new multibin series and I wanted to try it out. So I made this model. The original idea was to adapt this…
This Multibin Insert holds 12 tea lights, their charging cables and the remote. You can use it on its own or add a 4x3 LU Multibin Shell to fit into the grid or if you need to stack it (1.5 LU height). Print Settings Use the typical…
A 1x1 LU Multibin Insert designed as a soldering iron stand insert for MultiBuild bins. It uses a 608 bearing press-fitted into the center as a thermal barrier, preventing the hot tip of portable soldering irons from contacting or melting…
Keep your soldering iron and spare tips organized in a compact 1x1 bin. This is a MultiBin Top designed for the MultiBuild system. Compatibility The handle dimensions should be identical between generations, so these variants cover both:…
I have printed many lite panels to put it in a drawer for storing screws. After printing 50 panels and want to install it with a connector, i can't find the right one for the lite panel. The panels must be connectet with a space to fit…
A 2x2 LU Multibin Insert designed to hold a standard 68mm brass wool tip cleaner for soldering station setups. It features a recessed center for the brass wool container and surrounding tray space for storing small items like spare tips,…
This is a Multibin insert for storing rulers at a 45° angle, using the empty space above a Multiboard that would otherwise go unused. It's a single block — print two, orient them differently, and use them as a pair: The endstop sits lower…
1x1 Multibin Top remixed to hold 16 Volcano nozzles
This is a Multibin for Multiboard container > 3x3 x 0.5 height for the Apple Barrel (appleBarrel) paints, but also works for most other paints - just will be too large for the Valejo sets. This is for 13 paints
This Multibin Insert holds 12 tea lights, their charging cables and the remote. You can use it on its own or add a 4x3 LU Multibin Shell to fit into the grid or if you need to stack it (1.5 LU height). Print Settings Use the typical…
These are support structures for 2 wide Multibins based on KeepMaking's Multiboard . Putting an insert into a Multibin to act as a shelf is useful in many cases, but attaching the bin only in the back makes them pretty wobbly. These…
This is a 1x1 Multibin Top to hold up to eight LR44 batteries. Additional Parts Since this is only a Multibin Top you need extra parts. Please note that the following links might get outdated if parts are updated on Thangs. Use the…
This is a 1x1 Multibin Top to hold up to five CR2450 batteries. Additional Parts Since this is only a Multibin Top you need extra parts. Please note that the following links might get outdated if parts are updated on Thangs. Use the…
This is a 1x1 Multibin Top to hold up to six CR2032 batteries. Additional Parts Since this is only a Multibin Top you need extra parts. Please note that the following links might get outdated if parts are updated on Thangs. Use the…
Hey, I recently designed these MultiBin compatible spice racks to get my kitchen at least a little bit more organized. Printing: These models are as easy as it gets to print. Just use the settings that work best with your printer. No…
This is just a basic AA batteries holder for Multibins. There are other variants around, but I needed one quickly and was playing around in FreeCAD anyway. You can use it on its own or add a 1x1 LU Multibin Shell to fit into the grid or…
Keep your soldering iron and spare tips organized in a compact 1x1 bin. This is a MultiBin Top designed for the MultiBuild system. Compatibility The handle dimensions should be identical between generations, so these variants cover both:…
Multibin insert (1x1x1.5) to hold the tools provided with the Sovol SV06 and many other printers. Best use would be to put it in a 1x1x1.5 MultiBin shell and mount that on your wall. But it can be free standing. This is fully compatable…
This is a bin top for Multiboard's Multibins to accomodate miniature paints like these: Vallejo Air (26mm version) Citadel (34mm version) Vallejo Model Paint (37mm version) For now I only made a 4x1 version with a different number of…
Multibin Insert that holds 25 mm paint bottles like Warpaints and brushes. This insert fits a 2x2x0.75 and 2x2x0.5 Mult
Multibin Insert that holds 25 mm paint bottles like Warpaints and brushes. This insert fits a 3x2x0.75 and 3x2x0.5 Mult
Multibin Insert that holds 25 mm paint bottles like Warpaints and brushes. This insert fits a 4x2x0.75 and 4x2x0.5 Mult
Exacto knife holder for 1x1x2 multibin shell. You will need to print the Top Click Rim as well. Print face down w/o supports.
Rugged boxes compatible with MultiBin accessories. I have added an additional set of lids that can be used with the drawers. Additional hardware required: 2 * M2x20 Screw 4 * M2x30 Screw 2mm rubber seal MultiBoard System:…
Multibin Top for 3 pcs Loctite 242, 243. I have only chinese fake LOCTTLF versions and I hope that size fits for original too. 29 mm version is easy to remove. 28 mm is tight to bottle.
Multiboard/Multibin Tops for the 15g and 10g Gorilla Glue bottles. Made for Multibin Full Shells or Multibin Topped Shells attached with Top Click Rims . Credits to Jonathan (YouTube: @Keep-Making , @multiboard_io ) for creating…
Multibin top for dremel bits modifiied for the Dremel Sharpening Kit. It now has slots to hold the gauge and shims. You will need the top rim to insert into the Multibin Shell.
A 1x1 Multibin Lid with a separation grid for ease of organization.
A 1x1 Multibin Lid with a separation grid for ease of organization. This version has a “deeper” cross-member for increased durability and separation.
This is a parametric Multibin lid to hold needle files. The parametric values are: Number of files Handle diameter Multibin height (0.5 or 1 recommended) I recommend choosing your bin height based on the length of the file handles. The…
A Lite Multirail interface for attaching 1H-height Multibins, etc., at a 30-degree angle to a Multiboard. Accessories with Lite Multirails will snap into place for a secure hold. Print using standard Multiboard settings (0.2 mm layer…
A Push-Fit interface for attaching 1H-height Multibins, etc., at a 30-degree angle to a Multiboard. Accessories with Lite Multirails will snap into place for a secure hold. Print using standard Multiboard settings (0.2 mm layer height, 3…
This is an improved version of my original Multibin 1x1 - Drop-In File Needle File Lid. The design is a parametric 1X1 Multibin lid with holes and bosses to hold needle files. The parametric values are: Number of files Handle diameter…
A simple Multibin insert for holding three RAK Wisblock 19007 boards when doing firmware updates, etc. The three boards are stacked height-wise so that the battery and solar panel connectors are not obscured by the board in front, and the…
This is a modification of the Grid Divided Multiboard MultiBin. Like the Grid Divided Simple MultiBin drawers from Keep Making , but with twice as many compartments. This is a 2 wide, by 1 high, by 2 deep MultiBin Simple drawer with a…
This is a modification of the Grid Divided Multiboard MultiBin. Like the Grid Divided Simple MultiBin drawers from Keep Making , but with twice as many compartments. This is a 3 wide, by 1 high, by 2 deep MultiBin Simple drawer with a…
Multibin insert capable of holding (8) CR2032 batteries, and whatever else fits in the tray. I don't recommend using this model. The batteries are difficult to eject and the model consumes more filament than is really necessary. Try this…
Multibin top designed to hold (6) CR2032 batteries. Batteries can easily be ejected by rolling them laterally out of their slots.
Multibin top designed to hold (4) CR123A batteries.
Multibin top designed to hold (2) 9V PP3 batteries. You might think the slots need to be deeper to envelop more of the battery, but that would require more vertical clearance in order to remove the batteries from the slots. The slot depth…
A simple yet cool way to hold many 1 ml vials for storing on a multiboard or gridfinity. I belive that someone would find this helpful.
A remix of the 3x1 - Multibin Top to hold a 12-piece set of Sakura Micron Manga markers, or this Chotune set as sold on AliExpress . The lid is also marked with corresponding pen size, to easily identify which pen is missing. This top…
A remix of the 3x1 - Unversal Drop-In Lid to hold a 12-piece set of Sakura Micron Manga markers, or this Chotune set as sold on AliExpress . The lid is also marked with corresponding pen size, to easily identify which pen is missing. From…
Simple Multibin Insert to hold a finger nail clipper. It will go inside a Multibin shell. The center hole is 13x15mm.
1x1 Multibin Top remixed to hold 16 Volcano nozzles
Multibin insert to hold the Creality Vacuum Pump with no need to detach the bag adapter. Two versions included, one with holes for the accessories and charging cable and one with just the hole for the pump itself. Fits in a 2x2x1 Multibin.
This is a 2x1 Multibin Top designed to store twelve 608RS bearings. It can be placed on a standalone Multibin Insert (0.5H is sufficient - 2x1x0.5 - Bin - Multibin Insert - 3D model by Multiboard on Thangs ) and inserted into a Multibin…
A simple insert for Multibin to hold a 3D pen in a compact way. The insert fits into a 1x2 bin. For a full setup print: this model a 1x2 Micro Multibin Shell 4 x Multibin Insert Pin Printing instructions The parts are designed to be…
This is a speaker enclosure designed to work with the multi-board environment, meaning it will attach to your walls and add spaces for additional bins to attach to it. BOM: 2 - https://s.click.aliexpress.com/e/_oB0EJqW 15-60w 3 inch…
A top for the 4x3 Multibin that holds the Bambu Labs H2D Parts tray, the filament swatches, and 2 extra hotends
Simple funnel for the Multibin 1x1 system as Multibin Top. Learn more about the system: https://multiboard.io
This is a 4x2x0.5 CU insert for a set of six YATO needle files (160 x 75 mm). The side for the handles is deeper, so you can press on the handle for the business end to come up, making it easier to grab. Either paint the markings in your…
My Thanks the the Multiboard Team over at Multiboard.io if you haven't checked them out then you should. all parts were printed on a Centauri carbon using Elegoo PLA Rapid Plus with standard settings. no supports are required. I will not…
This is my first uploaded model so if anyone has any suggestions, let me know. I had a few different sizes of bearings rolling (pun intended) around my parts drawer, so I decided to make some custom inserts for Multibins to keep them…
These are Multibin Tops to hold either three or seven Nextruder nozzles. They work with regular Prusa sized nozzles and the E3D high flow variants that have a slightly bigger head. Because they are tightly nested in the holder, I did not…
I have created this label for for the Multibin Drawers as the Plain Labels are too thin for me particularly when creating a colored text label. I have used default walls and infills but I set to 0.16mm with ironing
This is a Multibin for Multiboard container > 3x3 x 0.5 height for the Apple Barrel (appleBarrel) paints, but also works for most other paints - just will be too large for the Valejo sets. This is for 13 paints
This is a Multibin for Multiboard container > 2x2 x 0.5 height for the Apple Barrel (appleBarrel) paints, but also works for most other paints - just will be too large for the Valejo sets. This is for the Multibin of the Multiboard…
This is a Multibin Top to hold a collection of needle files or similar items with a diameter up to 8.5 mm. Additional Parts Since these are only Multibin Tops you need extra parts. Please note that these links might get outdated if parts…
A Push-Fit interface for attaching 0.5H-height Multibins, etc., at a 30-degree angle to a Multiboard. Accessories with Lite Multirails will snap into place for a secure hold. Print using standard Multiboard settings (0.2 mm layer height,…
I use this to store in a drawer, but could be used on a wall as well. Intended to be used with this click rim and this multibin
I built a water proof backsplash for my garage sink out of craftsman versatrack rails. I wanted to hang various boxes for holding sponges, brushes and other items from the rails. I went with MultiBins from Multiboard since they already…
Description The original Creality vacuum pump insert for the Multibin ecosystem is a great concept, but when I printed it I ran into two issues: Very tight tolerances , leading to inconsistent fit No clean way to secure the insert when…
These are support structures for 2 wide Multibins based on KeepMaking's Multiboard . Putting an insert into a Multibin to act as a shelf is useful in many cases, but attaching the bin only in the back makes them pretty wobbly. These…
This is a 1x1 Multibin Top to hold up to eight LR44 batteries. Additional Parts Since this is only a Multibin Top you need extra parts. Please note that the following links might get outdated if parts are updated on Thangs. Use the…
This is a 1x1 Multibin Top to hold up to five CR2450 batteries. Additional Parts Since this is only a Multibin Top you need extra parts. Please note that the following links might get outdated if parts are updated on Thangs. Use the…
This is a 1x1 Multibin Top to hold up to six CR2032 batteries. Additional Parts Since this is only a Multibin Top you need extra parts. Please note that the following links might get outdated if parts are updated on Thangs. Use the…
This Multibin Insert holds power supplies or similar items with Europlugs. You can use it on its own or add either a 1x1 or 2x1 CU Multiboard Shell to fit into the Multiboard grid. Print Settings Use the typical Multiboard print settings:…
This is just a basic AA batteries holder for Multibins. There are other variants around, but I needed one quickly and was playing around in FreeCAD anyway. You can use it on its own or add a 1x1 LU Multibin Shell to fit into the grid or…
This is just a basic AAA batteries holder for Multibins. There are other variants around, but I needed one quickly and was playing around in FreeCAD anyway. You can use it on its own or add a 1x1 LU Multibin Shell to fit into the grid or…
This builds on the https://multibuild.io/ Drawer system. The ones I use are small for small parts. And I don't like having just a few parts on the bottom of one drawer. It was a waste of space. There was not any that were divided for…
