LayersFactory
Zgłoś model
1 / 1
Crealitly Vacuum Pump Multibin Top (Improved Fit + Mechanical Mount) — zdjęcie 1

Crealitly Vacuum Pump Multibin Top (Improved Fit + Mechanical Mount)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

meisbepat

meisbepat

@_42855

Creality filament vacuum pump multibin top with improved tolerances and support for mechanical click top rim mounting.

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
77
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (3)Powiązane

Description

The original Creality vacuum pump insert for the Multibin ecosystem is a great concept, but when I printed it I ran into two issues:

  1. Very tight tolerances, leading to inconsistent fit

  2. No clean way to secure the insert when using the Multiboard Top Click Rim

Rather than tweaking the existing STL, I rebuilt this insert using the official 2×2 Multibin Top STEP remix file as the dimensional base and recreated the original pocket geometry with adjusted clearances based on real-world testing.

This version drops cleanly into the Multibin shell, fits the vacuum pump reliably, and is designed to be mechanically retained using the Top Click Rim — no glue or magnets required.

Designed to fit

Printing Recommendations

  • Material: PLA (tested), PETG also works

  • Walls: 3

  • Layer Height: 0.20 mm

  • Infill: 15–25%

  • Supports: Required — Tree supports (Auto)

  • Orientation: Print upside down (top surface on the build plate)

This insert is intentionally designed to be printed upside down to significantly reduce filament usage compared to a traditional full bin insert.

Because of this orientation, the horizontal pocket surfaces are partially supported and will not be as cosmetically perfect as a fully enclosed bin insert. In practice, this has no impact on function and results in a substantial material savings.

Default slicer tolerance compensation is fine.

Assembly

  1. Drop the insert into the 2×2×1 LU Multibin shell

  2. Align and install the Top Click Rim as normal

  3. The rim mechanically retains the insert — no glue required

Attribution

This model is a remix of the following:

Tagi

organizercrealityvacuummultiboardmultibinmultibintop