Crealitly Vacuum Pump Multibin Top (Improved Fit + Mechanical Mount)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Creality filament vacuum pump multibin top with improved tolerances and support for mechanical click top rim mounting.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Description
The original Creality vacuum pump insert for the Multibin ecosystem is a great concept, but when I printed it I ran into two issues:
Very tight tolerances, leading to inconsistent fit
No clean way to secure the insert when using the Multiboard Top Click Rim
Rather than tweaking the existing STL, I rebuilt this insert using the official 2×2 Multibin Top STEP remix file as the dimensional base and recreated the original pocket geometry with adjusted clearances based on real-world testing.
This version drops cleanly into the Multibin shell, fits the vacuum pump reliably, and is designed to be mechanically retained using the Top Click Rim — no glue or magnets required.
Designed to fit
2×2×1 LU – Topped Rail – Multibin Shell
https://thangs.com/designer/Multiboard/3d-model/2x2x1%20LU%20-%20Topped%20Rail%20-%20MultiBin%20Shell-11275902×2 – Top Click Rim
https://thangs.com/designer/Multiboard/3d-model/2x2%20-%20Top%20Click%20Rim-1140771
Printing Recommendations
Material: PLA (tested), PETG also works
Walls: 3
Layer Height: 0.20 mm
Infill: 15–25%
Supports: Required — Tree supports (Auto)
Orientation: Print upside down (top surface on the build plate)
This insert is intentionally designed to be printed upside down to significantly reduce filament usage compared to a traditional full bin insert.
Because of this orientation, the horizontal pocket surfaces are partially supported and will not be as cosmetically perfect as a fully enclosed bin insert. In practice, this has no impact on function and results in a substantial material savings.
Default slicer tolerance compensation is fine.
Assembly
Drop the insert into the 2×2×1 LU Multibin shell
Align and install the Top Click Rim as normal
The rim mechanically retains the insert — no glue required
Attribution
This model is a remix of the following:
Creality Vacuum Pump Insert for Multibin
by Jay Shelton on Printables
https://www.printables.com/model/1323279-creality-vacuum-pump-insert-for-multibin
(Original concept and pocket geometry referenced and modified.)2×2 – Multibin Top – STEP Remixing File
by Multiboard on Thangs
https://thangs.com/designer/Multiboard/3d-model/2x2%20-%20Multibin%20Top%20-%20STEP%20Remixing%20File-1145208
(Used as the dimensional foundation for this rebuild.)2×2×1 LU – Topped Rail – Multibin Shell
by Multiboard on Thangs
https://thangs.com/designer/Multiboard/3d-model/2x2x1%20LU%20-%20Topped%20Rail%20-%20MultiBin%20Shell-11275902×2 – Top Click Rim
by Multiboard on Thangs
https://thangs.com/designer/Multiboard/3d-model/2x2%20-%20Top%20Click%20Rim-1140771
