1 / 3
Centauri Carbon USB and PTFE Relief and Guide. Combatable without riser.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A USB cable strain relief and PTFE tube guide.
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 160
- Makes
- 0
- Views
- 1,127
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After fraying a cable out from the plug I decided to look into strain reliefs, I found some really good ones that were too tall for the glass top without a riser. So I made one that fits under the glass top on a stock machine.
It also doesn't rub on the glass, My first version did that and it was wearing pretty quick.
Uses M2.5 x 16mm screws in place of the stock USB cable screws.
M3 heatset inserts and 8mm screws to hold the cable top cover on.
And the stock shoulder bolt for the now removed cable chain.