Fully printable needle nose pliers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3d printable needle nose pliers
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 42
- Makes
- 1
- Views
- 188
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I needed a set of needle nose pliers that is not conductive for work in industrial automation panels. There are commercially available models that would have worked, but I wanted to print them. Available 3d printable models didn't quite fit what I was looking for. Here's my attempt.
Printed at 999 walls for strong 100% infill
might require brim or mouse ear depending on your bed adhesion.
printed on creality K1 with Sunlu PLA black.
Print two pieces of the plier body and assemble by press fitting the pin through their center holes. If the pin assembly doesn't friction fit for you, you can try scaling one up or down slightly, or use a drop of adhesive to hold them together.
You could also scale the entire model up or down to suit your needs.