Print in place Dice-Box

This is a very satisfying print-in-place retractable dice box for standard 15mm or 16mm dice. The Box is inseperable and can only be produced with an additive manufacturing technique. Also the box is specifically designed for 0.2mm layerheight. You can choose how many dice you want to store. I made a version for 2, 3 and 4 dice. Enjoy!

Optionally you can print 3 dice yourself. Ideally you might try different setups of elephant-foot compensation to find the sweet spot for your 1 layer. Also uploaded one Slic3r setting that worked beautifully with my Printer and a pre-sliced file. But you should definetely set the first layer to 0.15mm if you print with an average layer height of 0.15mm. Otherwise your dice will not be equal in every dimension.

Classic gambling game with 3 dice:

Firsrt you throw all the dice and look at the results. A “5” is more worth than a “3” but every pair (e.g. 2x “1”) is more worth than any single eye count. Then you have a second throw where you decide if you want to throw all three dice again or just two or only one and the same for a third throw. Aferwards you pass the dice to the next person. Whoever got the highest single/pair/triplet count wins. So in a nutshell:

1 < 2 < 3 < 4 < 5 < 6 < 1-1 < 2-2 < 3-3 < 4-4 < 5-5 < 6-6 < 1-1-1 < 2-2-2 < 3-3-3 < 4-4-4 < 5-5-5 < 6-6-6