Snapmaker U1 4 Colour Flowrate Calibration
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Calibrate the Filament Flowrate of alle four colors in one Print - Snapmaker U1
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 100
- Makes
- 0
- Views
- 773
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
Calibrate Flowrate of all four colours in one print!
Important:
before you calibrate the Flowrate you need to print a Temperature Tower for each Filament to get the perfect Temperature Settings.
Make sure vase mode is enabled and set line width to 0.45. Print with 3-4 bottom layers, 0% infill and by object.
Measure values of all 4 walls eg. 0.42, 0.45, 0.43, 0.44 = average 0.435 mm.
use this formula to get the new Flowrate:
0.45 mm (current line width in slicer)/0.435 mm (measured average value) = 1.0345
0.95 (current Filament Flowrate in Slicer)* 1.0345 = 0.983 (new Flowrate)
After you calibrated the Flowrate you should calibrate Pressure Advance and max volumetric speed.