1 / 3
V0.2 SMA wifi antenna skirt mount — image 1
1 / 3

V0.2 SMA wifi antenna skirt mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model to allow using an adapter to mount an SMA (really, RP-SMA) connector to the printer skirt.

Rating
5 / 5
Likes
2
Downloads
19
Makes
1
Views
92
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

This is a mount to help you put a regular wifi AP antenna (RP-SMA connector) on your V0.2.  Assuming your pi or pi clone supports an external antenna.  

I designed this to work with DigiKey part number 740-1031-ND. It is an RP-SMA to U.FL adapter with a short cable.  The BTT raspberry pi clones have a U.FL connector and include an antenna, but I was not impressed with the factory antenna performance (it's not great with the external antenna, either, but at least it's usable).  

This should just be a press fit into the skirt, and then insert the RP-SMA end of the adapter into the recessed side. Install the retaining nut on the outside and then attach your antenna.

I am including the OpenSCAD file, which has four parameters in case you need to make adjustments for your printer or a different adapter. They are right at the top of the file so you can just enter the revised dimensions, re-render, and export to STL. No CAD skills required.   OpenSCAD is free and open source.

antenna_hex: Flat to flat measurement, in mm, of the hex flats on the antenna adapter's RP-SMA side.

skirt_hex: Flat to flat measurement, in mm, of the hex openings in the skirt.

antenna_hole: Diameter of the antenna hole, in mm. I have added a chamfer to account for elephant foot so hopefully this should not require adjusting in most circumstances. All RP-SMA connectors should have the same major diameter.

plug_height: How tall the mount is. You shouldn't normally need to adjust this.

Tags