1 / 3
V0.2 SMA wifi antenna skirt mount — zdjęcie 1
1 / 3

V0.2 SMA wifi antenna skirt mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Model to allow using an adapter to mount an SMA (really, RP-SMA) connector to the printer skirt.

Ocena
5 / 5
Polubienia
2
Pobrania
19
Wydruki
1
Wyświetlenia
92
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This is a mount to help you put a regular wifi AP antenna (RP-SMA connector) on your V0.2.  Assuming your pi or pi clone supports an external antenna.  

I designed this to work with DigiKey part number 740-1031-ND. It is an RP-SMA to U.FL adapter with a short cable.  The BTT raspberry pi clones have a U.FL connector and include an antenna, but I was not impressed with the factory antenna performance (it's not great with the external antenna, either, but at least it's usable).  

This should just be a press fit into the skirt, and then insert the RP-SMA end of the adapter into the recessed side. Install the retaining nut on the outside and then attach your antenna.

I am including the OpenSCAD file, which has four parameters in case you need to make adjustments for your printer or a different adapter. They are right at the top of the file so you can just enter the revised dimensions, re-render, and export to STL. No CAD skills required.   OpenSCAD is free and open source.

antenna_hex: Flat to flat measurement, in mm, of the hex flats on the antenna adapter's RP-SMA side.

skirt_hex: Flat to flat measurement, in mm, of the hex openings in the skirt.

antenna_hole: Diameter of the antenna hole, in mm. I have added a chamfer to account for elephant foot so hopefully this should not require adjusting in most circumstances. All RP-SMA connectors should have the same major diameter.

plug_height: How tall the mount is. You shouldn't normally need to adjust this.

Tagi