Retrofit Label Holder for Unlockable Loose Filament Sample Spool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A label holder that can be glued to the "Unlockable Loose Filament Spool" models by switchborg and TheGoofy.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 40
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This version of the label holder can be glued to the side of an already printed "Unlockable Loose Filament Spool". It takes the same labels as the version with integrated label holder (look there for label size details).
Print with 0.4mm nozzle, 0.2mm layer height, supports required for the label frame. PLA recommended.
After printing, carefully remove the supports, apply superglue to the channel on the side and the bottom of the label frame, then slide sideways onto the spool. Wait until the glue is completely dry (can take several hours) before inserting a label.