Jeff - The Gelatinous Pill Monster - Decorative and Deck Box for card games
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is Jeff, a Gelatinous Pill Monster that can be used as a decoration and as a deck box for card games.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This model was inspired by the classic RPG monster, the Gelatinous Cube, reimagined in a cylindrical, pill-shaped form.
During 3D printing tests, the best result I achieved for the closing mechanism kept the lid firmly in place, but left a small gap in the middle of the model, which can be seen in the photos.
Details
Card dimensions without sleeves: 30 × 90 mm
Maximum capacity: 50 sleeved cards
Total STL files: 4
1-4_Bottom
2-4_Top
3-4_Sclera
4-4_Iris
Print Test Configuration
Material: PLA
Layer height: 0.16 mm
Infill line distance: 8.0 mm
Tree supports: On
For the file 1-4_Bottom, I set the Z position to -1 mm for better print adhesion.
Specifications
CapacityUp to 50 sleeved cards
Card Size: 30 × 90 mm
STL files: 4
Modeled in Blender.