Adapter to fit an ApolloLander to a Switchwire/EnderWire (and other similar Voron brackets)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ApolloLander or ApolloMini with linear backplate model required (not included here)
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 13
- Makes
- 0
- Views
- 201
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Adapter plate to fit an ApolloLander/ApolloMini to Enderwire and Switchwire (and other voron mount)
You can get the Apollo on my Patreon (here)

nozzle height is the same as stealthburner, so you can use a probe in the rear block, like an eddy duo/coil. and might still work on modded similar block like for beacon/cartographer.
use linear rail mgn12h version of the apollo backplate
use the extra lock mainbody of the Apollo
On the Switchwire/Enderwire a bit of Y is lost, as I had to shift the apollo forward (shifted 5.9~11.4mm depending on hotend), relative to the original hotend position.
No X lost
Sherpamini will fit with motor facing the back, some other extruder may need a riser for a rear facing motor, but front facing motor is an option on the Apollo.
Adapter to the switchwire/enderwire block
M3x8: top screws
M3x6: optional right below the top (button head preferably, but socket head might still fit, as long as they don't stick out)
M3x6: on the bottom, again button head (socket head might work)
apollo to adapter
M3x10~M3x12: four middle screws (mgn12h patten)
M3x6: lower right and lower left (you don't need all 4, 1 on each side is enough)
M3x4: extra lock, (underside in the rear after the main body is installed, again 2 is enough)
A preview of what it would look like:

------
Support me on Patreon !
https://patreon.com/squirrelf3d
or buy me a coffee
https://ko-fi.com/squirrelf3d
https://www.buymeacoffee.com/squirrelf
------
https://instagram.com/squirrelf3d/
https://twitter.com/squirrelf3d