Adapter to fit an ApolloLander to a Switchwire/EnderWire (and other similar Voron brackets)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ApolloLander or ApolloMini with linear backplate model required (not included here)
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Adapter plate to fit an ApolloLander/ApolloMini to Enderwire and Switchwire (and other voron mount)
You can get the Apollo on my Patreon (here)

nozzle height is the same as stealthburner, so you can use a probe in the rear block, like an eddy duo/coil. and might still work on modded similar block like for beacon/cartographer.
use linear rail mgn12h version of the apollo backplate
use the extra lock mainbody of the Apollo
On the Switchwire/Enderwire a bit of Y is lost, as I had to shift the apollo forward (shifted 5.9~11.4mm depending on hotend), relative to the original hotend position.
No X lost
Sherpamini will fit with motor facing the back, some other extruder may need a riser for a rear facing motor, but front facing motor is an option on the Apollo.
Adapter to the switchwire/enderwire block
M3x8: top screws
M3x6: optional right below the top (button head preferably, but socket head might still fit, as long as they don't stick out)
M3x6: on the bottom, again button head (socket head might work)
apollo to adapter
M3x10~M3x12: four middle screws (mgn12h patten)
M3x6: lower right and lower left (you don't need all 4, 1 on each side is enough)
M3x4: extra lock, (underside in the rear after the main body is installed, again 2 is enough)
A preview of what it would look like:

------
Support me on Patreon !
https://patreon.com/squirrelf3d
or buy me a coffee
https://ko-fi.com/squirrelf3d
https://www.buymeacoffee.com/squirrelf
------
https://instagram.com/squirrelf3d/
https://twitter.com/squirrelf3d