1 / 2
Spacers for mounting a Voron Bed on the SV08 with Extrusions — image 1
1 / 2

Spacers for mounting a Voron Bed on the SV08 with Extrusions

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I've mounted some 10x20 extrusions inside the printer and used some 20x20 extrusions to counter it

Rating
0 / 5
Likes
2
Downloads
8
Makes
0
Views
143
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I’ve mounted 1020 extrusions inside the printer and used some 2020 extrusions underneath to counter/support them. I also used spacers so the plastic housing wouldn’t be pulled down, ensuring the extrusions sit straight.

For the bottom side, you’ll need to cut the 2020 extrusions to 270 mm and mount them using some corner brackets.

For my German folks, you can watch my video where I talk a bit more about what exactly I did.

Affiliate BOM:
Two 1020 Extrusions: https://s.click.aliexpress.com/e/_c3SKsdPT
Two 2020 Extrusions: https://s.click.aliexpress.com/e/_c3uqtpC9
Corner Brackets: https://s.click.aliexpress.com/e/_c3rpuFDn
Four m3x40mm Bolts
Four m3 T-Nuts

Tags