Skadis tray - space saver *updated*
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Strong tray that free some board space
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 19
- Makes
- 0
- Views
- 90
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I hadded a before and after set of 2 images to show how much space can be saved.
*edit: I modified the width of the box to removed the gap if you put 2 or more side by side. I will leave the older model available too.
Print settings
Nozzle size ......................... 0.4 mm
Layer height ....................... 0.2
Number of perimeters ... 2 (or more)
Infill ...................................... 15% (or more)
Supports ............................. support only for hooks
Bed surface ......................................... glue stick + brim(pla)
Hotend temp ...................................... 240c / 210(pla)
bed temp .............................................. 80c / 60(pla)
Materials used: .................................. PETG / PLA