Xmas tree ball 1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Christmas tree ornament
- Rating
- 5 / 5
- Likes
- 64
- Downloads
- 223
- Makes
- 3
- Views
- 646
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
We made our own Christmas decorations and we want to share them with you.
PLA SILK is a naughty material and depends on the speed at which it is fed. I found it useful to use 220 degrees Celsius on the hotend and the speeds described below. Your settings may work differently for other style.
Use a collar spaced 0.1mm apart with fifteen lines as adhesion.
Needed parts:
hanging on a tree with an internal diameter of at least 14mm
3d printed spiral style ornament (vase)
Please give a HEART for the download! We like to collect them. ;-)
PRINT SETTINGS:
Total time → 1 Hour
Number of print files → 1
Layer height → 0,16(0,12)
Layer width → 0,6(try 0,4mm, but I haven't tested it)
Perimeters → 1(vase)
Acceleration perimeters → 1000mm/s2
Speed → 120mm/s
Min speed → 25mm/s(20mm/s)
Minimum layer time → 9s
Infill → 0 %
Material → SILK PLA, PLA, PETG
Total weight → 16 g
Support type → no