Xmas tree ball 1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Christmas tree ornament
- Ocena
- 5 / 5
- Polubienia
- 64
- Pobrania
- 223
- Wydruki
- 3
- Wyświetlenia
- 646
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
We made our own Christmas decorations and we want to share them with you.
PLA SILK is a naughty material and depends on the speed at which it is fed. I found it useful to use 220 degrees Celsius on the hotend and the speeds described below. Your settings may work differently for other style.
Use a collar spaced 0.1mm apart with fifteen lines as adhesion.
Needed parts:
hanging on a tree with an internal diameter of at least 14mm
3d printed spiral style ornament (vase)
Please give a HEART for the download! We like to collect them. ;-)
PRINT SETTINGS:
Total time → 1 Hour
Number of print files → 1
Layer height → 0,16(0,12)
Layer width → 0,6(try 0,4mm, but I haven't tested it)
Perimeters → 1(vase)
Acceleration perimeters → 1000mm/s2
Speed → 120mm/s
Min speed → 25mm/s(20mm/s)
Minimum layer time → 9s
Infill → 0 %
Material → SILK PLA, PLA, PETG
Total weight → 16 g
Support type → no