Magnetic 3D Benchy for Prusa Core One/+/L
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.66 – €0.81 net (excluding VAT)
For file: Magnetic Benchy_0.4n_0.2mm_PETG_COREONE_44m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.74 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 43.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Benchy with an embedded magnet for Prusa Core One. Designed for 8x3mm magnets, but comment if you need other sizes.
- Rating
- 0 / 5
- Likes
- 43
- Downloads
- 205
- Makes
- 1
- Views
- 807
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I thought it would be a fun add on for the Prusa Core One to have a magnetic benchy, so I designed one! Has a small amount of filament between the bottom and the magnet for extra magnet strength.
This fits 8x3mm magnets, but please post in the comments if you would like a different size.
Print Settings
Use a low infill so that it is not too heavy for the magnet. Also add a pause for inserting the magnet.
Layer Height: | 0.2 | Support: | NO |
Infill : | 5% | Brim | NO |
Material: | PETG | Filament Designation : | Orange |
More Designs:
 |  |  |