Elgato Streamdeck MK1 (classic) under desk drawer/slider
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pull out your streamdeck sideways into an angle for easy use
- Rating
- 5 / 5
- Likes
- 42
- Downloads
- 77
- Makes
- 0
- Views
- 1,126
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Print your own angled underdesk slider for your MK1 (classic).
You have two options:
- With a 608 Bearing (nicer pull out)
- With a sliding part (a bit friction but no bearing needed)
Choose the right frame.
If you choose the bearing version just press it on the bearing socket.
Print options:
Print both frame and husk upright!
Husk: With the front down (no supports needed)
Frame: Use tree supports for a good cut out finish.
I used 100% infill on the frame for extra strength.
The husk likes at least 3 walls (more is better).
Wall printing order "outer/inner" for nice tolerances.
0.2mm layers are ok.
Assembly:
- Put bearing on its socket on the frame (slider version doesn't need this step)
- Slide frame into the husk from the back
- Glue the handle on the front of the slide (is basically also the stopper for sliding it in)
- Now screw it under your desk (screw holes are all reachable in assembled condition)
- Give it a like on printables. ;)