Hollow Knight & Hornet magnets (3 magnets 5x3, 5x10, 5x15)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed to use 5x10, 5x15 variant of magnets (except 5x3)
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 28
- Makes
- 0
- Views
- 140
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
Character magnets from legendary metroidvania game Hollow Knight.
Remixed to fit 5x10 mm magnets (3 pieces for each head).
Remixed to fit 8x15 mm magnets (3 pieces for each head).
The holes are designed so that the magnet fits in tight, without glue.
(magnet hole depth = 2mm).
I recommend printing with a layer height of 0.1 mm for greater accuracy.
EYES:
nit: I couldn't get the eyes to fit without glue; the hole in the model was too small, so I had to print the Hornet's eyes at a 0.2mm model height and glue them in place with hot glue.
For the Hollow Knight model, I printed the eyes at 103% scale on both the X and Y axes (model height of 0.4mm) to ensure a tight fit without glue.
Thanks @Gh61 and @bagel