Bottom Rod Dust Cover for Prusa CORE One
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A dust cover for the holes in the chassis bottom of the CORE One where the z-axis rods poke through.
- Rating
- 5 / 5
- Likes
- 63
- Downloads
- 385
- Makes
- 22
- Views
- 1,088
- Reviews
- 22
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a dust cover for the holes in the bottom of the Prusa CORE One printer where the z-axis rods poke through the chassis.
This model is similar to Očko's Core One/+/L _ _ _ Z axis Dust Protector but with two major advantages:
Only one model for both halves: Easier to pair and replace lost halves.
FreeCAD Design: Open design file for accessibility and adaptability. Change lengths, diameters, and clearances by editing numeric parameters.
I added additional models with increased clearances around the z-axis rod.
If you experience problems like the cover being lifted, try a version with a higher clearance.
You may also ask for different variants in the comments or just use FreeCAD to configure your own customized version.
Printing:
Filament material: PETG
Resolution: 0.20 mm
Infill: 100%
Supports: No