Bottom Rod Dust Cover for Prusa CORE One
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A dust cover for the holes in the chassis bottom of the CORE One where the z-axis rods poke through.
- Ocena
- 5 / 5
- Polubienia
- 64
- Pobrania
- 396
- Wydruki
- 22
- Wyświetlenia
- 1110
- Oceny
- 22
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a dust cover for the holes in the bottom of the Prusa CORE One printer where the z-axis rods poke through the chassis.
This model is similar to Očko's Core One/+/L _ _ _ Z axis Dust Protector but with two major advantages:
Only one model for both halves: Easier to pair and replace lost halves.
FreeCAD Design: Open design file for accessibility and adaptability. Change lengths, diameters, and clearances by editing numeric parameters.
I added additional models with increased clearances around the z-axis rod.
If you experience problems like the cover being lifted, try a version with a higher clearance.
You may also ask for different variants in the comments or just use FreeCAD to configure your own customized version.
Printing:
Filament material: PETG
Resolution: 0.20 mm
Infill: 100%
Supports: No