Acoustic Guitar Headstock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable replacement headstock for a acoustic guitar.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 51
- Makes
- 0
- Views
- 661
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Public Domain
Roommate broke his guitar and didn't have any further uses for it. So I designed a new headstock to replace it.
It took a couple of itterations but I think I finally got it structurally sound and fully playable
For slicing, I printed it with the base on the side of the head with 4 perimeters and 20% infill.
It might be a bit overkill but I wanted to make sure it would last a long time under strain.
For attachment, I cut off the remainder of the previous headstock and drilled 10mm holes in the given flat surface. I then used super glue and clamps to set the two pieces together.
If you find that the glue does not hold the right angle for the headstock to the guitar, then I would install the brace included. To install the brace place it on the back of the guitar where the two ends meet to ensure a good counter force to the tension of the strings.