Sockel für Teelicht 50x50 von Glasfoto
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Beleuchteter Sockel für Teelicht von Glasfoto.com
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Ich habe ein Advents Teelicht von Glasfoto.com erhalten. Die ins Glas eingebrachte Schneeflocke kam leider nicht so zur Geltung wenn das Teeelicht brannte. Das passiert erst wenn der Glaskörper von unten beleuchtet wird. Die von Glasfoto angebotene Beleuchtung war mir für das Teelicht zu groß. Also habe ich eine Beleuchtung in der Größe 50x50x12 entworfen. Die Beleuchtung wird von einem ESP32 C3 mittels WLED gesteuert.. Durch WLED-Basic App kann die Helligkeit, Farbe und verschiedene Effekte gesteuert werden. Der Materialaufwand beträgt ca 10€ und der Lötaufwand beschräkt sich auf das Verbinden von 3 bzw. 6 (mit Fernbedienumgsempfänger) Drähten. Der Sockel wird über USB-C mit Strom versorgt. Der Energiebedarf der Beleuchtung liegt zwischen 0,5 und max 1,5W.
Weiter Informationen können auf dem WLED Projekt gefunden werden.
Die Bilder 8-16 zeigen den Zusammenbau des Sockels.
Meterialien: PLA-Matte oder PLA-Basic; PLA Wood, 1x ESP32 C3, Litze z.B 3x ca 5cm 26 awg ,, WS2812B Ledstreifen mit 3 Led 60 Led/m , (1x TSOP48 Optional für Fernbedienung)
I received an Advent tea light from Glasfoto.com. Unfortunately, the snowflake brought into the glass did not come into its own when the tea light was burning. This only happens when the vitreous body is illuminated from below. The lighting offered by Glasfoto was too big for me for the tea light. So I designed a lighting in the size 50x50x12. The lighting is controlled by an ESP32 C3 via WLED. Through WLED-Basic App, the brightness, color and various effects can be controlled. The material cost is about 10€ and the soldering effort is limited to connecting 3 or 6 (with remote control receiver) wires. The socket is powered by USB-C. The energy requirement of the lighting is between 0.5 and max 1.5W.
Further information can be found on the WLED project.
Pictures 8-16 show the assembly of the base.