Studio light cover 97mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple cover suitable for 97mm diameter studio lights for photography to protect the bulb.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 21
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple cap designed originally for the Portaflash 336VM studio lights, but can be used on any really, if you want you can scale to the dimensions you require.
I would suggest a strip of sticky back felt on the inside to a. keep it snug and b. to stop any scratches etc.
Printing wise, I used PLA-CF as that was in the machine, but anything would work really. 2/3 walls, 0.2 layer height, supports not required. Print on the flat side, job done.
The image shows the first revision which had writing on it, this file does not. That was the only change.