EMCO Unimat X-axis dial gauge attachment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enables a dial gauge with an ~8 mm shaft to be attached to the Emco Unimat lathe.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 32
- Makes
- 0
- Views
- 174
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
EMCO Unimat X-axis dial gauge attachment
Enables a dial gauge with an ~8 mm shaft to be attached to the Emco Unimat lathe. An M5 nut and hexagon screw are also required for this model. The suitable length for the screw is 20 mm. The hole in the knob is designed to be tight, and the screw must be turned and pressed through.
Note
The same version of this model is also available on Thingiverse. For documentation, printing instructions, updates, and the changelog, visit: https://www.thingiverse.com/thing:7255576
License
Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)
You are free to:
Share — copy and redistribute the model in any medium or format
Adapt — remix, transform, and build upon the model
Use commercially
Under the following terms:
Attribution — You must give appropriate credit to the original author
ShareAlike — If you modify the model, you must distribute your contributions under the same license
This model is provided as-is, without warranty. Use at your own risk.