Lifeproof Flooring Block Tool
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.43 – €5.42 net (excluding VAT)
For file: LifeProof Block Tool_0.4n_0.2mm_PLA_COREONE_2h27m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.92 excluding VAT (range midpoint).
- Weight reported by the author
- 113 g
- Print time reported by the author
- 2.46 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This hammer/tapping block is used to install Lifeproof Vinyl Flooring.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 54
- Makes
- 0
- Views
- 221
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This hammer/tapping block is used to install Lifeproof Vinyl Flooring. The notch along the length and width of the block allow you to hammer the plank without damaging the tongue or grove.
Print Info
Filament: Inland PLA PRO (PLA+) Black from Micro Center, SKU 989269
Printer: Prusa CORE One with HF 0.4mm nozzle
Layer Height: 0.2 mm, Balanced Profile
Top Layers: 5, Bottom Layers: 5
Perimeters: 5
Infill: Grid, 25%
Supports: None
Adhesion: None