Märklin H0 modular Bridge Rail-C 188mm Straight Element (multi-part) / Märklin H0 modulare Brücke Gleis-C 188mm Element gerade (mehrteilig)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Straight rail element Rail-C 188mm of Modular bridge system for H0 model railway. Good for temporary "carpet"-railways.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 103
- Makes
- 0
- Views
- 321
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
Motivation
When building a temporary model railway bridge or ramp, you need pillars with various sizes.
Using Lego for this purpose did not look too realistic.
For this reason I designed a pluggable model railway pillar system, that allows you to create any pillar height you need.
For a more realistic look of the bridge I designed a rail element for the straight Rail-C 188mm rails.
This design allows a two colour design of the support element.
By using a structured sheet metal for printing the cover parts, you get a very realistic looking top surface for the paved side parts.
The elements fit on top of the modular Bridge pillar system and can be connected with snap-in-connectors.
The design leaves enough tolerance for the changing slopes needed for the bridge ramps.
The Märklin Rail-C system is intended to be used with for use with our design.
Printed with prusament PLA (Gentleman's Grey)
To build a complete ramp or bridge with ramps, you need quite a number of pillars and rail elements.
For one complete straight Rail-C 188mm support element (multi part) you need to print the following components:
1x H0_Bruecke_gerade_188mm_Basis_v03.stl (base element)
(print orientation: upright)
(colour: Gentleman's Grey)
2x H0_Bruecke_gerade_188mm_Abdeckung_v03.stl (Paveway left/right)
(print orientation: top face facing downwards, structured metal sheet)
(colour: Grey)
2x H0_Bruecke_Verbinder_v01.stl (snap-in-connector)
(print orientation: left or right side)
(colour: Gentleman's Grey)
Assembly
[Straight Rail-C 188mm Support Element complete]
The curved R1 rail support base element is printed as a single part.
Simply place the paveway-parts (left+right) in their related positions on the base element.
(the paveway parts are identical and do only fit into related position in any orientation)
This gives a nice impression of a steel construction.
The snap-in-connectors go into the small openings (left+right) at the ends of the rail support element.
The connected rail support elements fit on top of the pillar system.
The Märklin straight Rail-C element 188mm is simply placed in the center position.
Play & Enjoy!!!