Vase mode shelf and drawer .
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vase mode shelves and drawer . fast prints and low filament consumption .
- Rating
- 4.5 / 5
- Likes
- 31
- Downloads
- 146
- Makes
- 2
- Views
- 1,117
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Vase mode based shelves and drawers ( curas spiralize outer contour).
The drawers can be printed with any line width whereas the shelves would have to be printed with 0.8 or lower ( will fix it soon ).
I have printed the drawers with layer height of 0.26 and the shelves with 0.24mm .
time taken with the above parameters was 3 hrs for the shelves and 45 min for the drawers . and the filament used was 80 grams and 17 grams respectively (basic file) .
The drawres have 3 (editable) areas where you can slide thin sheet of printed plastic to divide the drawers .
The design can easily be changed in fusion 360 by installing the free / personal version of fusion 360 and going to the modify drop down option and selecting change parameters(some changes break the files . so just be carefull and just check everything before printing ).
Please let me know if you face any problem with the design or have any suggestions .
Also it would be nice if you do any changes and can share the files so others can just download your files instead of wasting their own time in fixing / chaining the same parameters.