Vase mode shelf and drawer .
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vase mode shelves and drawer . fast prints and low filament consumption .
- Ocena
- 4,5 / 5
- Polubienia
- 31
- Pobrania
- 146
- Wydruki
- 2
- Wyświetlenia
- 1117
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Vase mode based shelves and drawers ( curas spiralize outer contour).
The drawers can be printed with any line width whereas the shelves would have to be printed with 0.8 or lower ( will fix it soon ).
I have printed the drawers with layer height of 0.26 and the shelves with 0.24mm .
time taken with the above parameters was 3 hrs for the shelves and 45 min for the drawers . and the filament used was 80 grams and 17 grams respectively (basic file) .
The drawres have 3 (editable) areas where you can slide thin sheet of printed plastic to divide the drawers .
The design can easily be changed in fusion 360 by installing the free / personal version of fusion 360 and going to the modify drop down option and selecting change parameters(some changes break the files . so just be carefull and just check everything before printing ).
Please let me know if you face any problem with the design or have any suggestions .
Also it would be nice if you do any changes and can share the files so others can just download your files instead of wasting their own time in fixing / chaining the same parameters.