Liczymy pasujące modele…
You can get very inexpensive wireless charging boards from Ali Express that work just fine with apple products. It might not be as fast as the expensive Apple one, but they work exactly the same way. The disk slides into the charging…
Print Details: 3D Printer: Creality K1C Print Material: Hyper PLA Print Settings: Standard 0.4mm nozzle with default settings. Print Support Required: Yes Print Duration: 1h 45m 2s Dimensions: a. Model Dimensions Slot Height: 18.8mm Top…
Better stars for less drooping first layers on the snowflakes. Box is scaled to 150%
I gave RNLDNKP 's Ticket To Ride card deck a full back. I have a small print bed (Bambu Lab A1 mini) and needed to cut the model in the slicer to be able to print it. This works, but because the original model has two legs in the back it…
Plastic containers Box for Systainer Organizer. The boxes are fuly compatible wiht the original containers and the gen3 Systaner System. Stack 2 on each other the hight is by 68mm. Printing The Modells are designt with following printing…
Many toothpick canopies for a 14mm camera are not suited to the up front bulk of the o4 (lite) camera so I designed this canopy to work with my o4 mount ( https://www.printables.com/model/1147195-dji-o4-lite-14mm-camera-mount ) providing…
General: This is a print-friendly action figure base with movable joints that can be posed into pretty much any position. The joints are designed to be stiff and keep their position. The figure has a height of about 24 cm. The joints are…
Why this mod? Ender 3 S1 is still a decent printer, but transferring models via SD card is pain OctoPrint - and RaspberryPi-based OctoPi distro in particular - is a popular way to solve this existing mods either utilise the drawer space…
This brick-style castle dice tower is a perfect addition to tabletop games like Dungeons & Dragons, Pathfinder, and other RPGs. Designed to be functional, visually appealing, and easy to print – no supports required! 🔹 What’s included: 1×…
Easy use 2.6mm male connector "Zwergstecker" for Fischertechnik, Märklin, etc. In terms of quality, they don’t quite measure up to the tried-and-true plugs from Fischertechnik or Märklin, but if you don’t have an original on hand, they’re…
After a few successful small prints with cardboard spools (primarily Overture) on the Core One with MMU3 Community Edition, a problem surfaced with larger prints - the common complaint of filament not feeding, leading to the Core One…
I made a Friendly Articulated Tennis Ball Stand. It also works for baseballs, pickleballs and lacrosse balls. Share a picture if you print one!
This bowl was designed to help cats avoid whisker fatigue/stress while eating. The inside is shallow, while still allowing food to stay inside the bowl. I would recommend printing with non-toxic/food-safe filament and using a food-safe…
Cantilever Tool/Sewing Box Remix (PLA-Optimized, Modular Joints) This remix of the popular parametric cantilever box features a key modification for easier, faster printing and improved stability, especially for PLA users. Key Features of…
As an exercise in learning Programmatic CAD (OpenSCAD first, now I like build123d a lot) I designed this Gravitrax compatible spacers. The smallest ones (0.5 and 1 units) I tried to be close to the originals. For the higher ones I tried…
Multi-color layer friendly Color Top layer Bottom layer White 8.00 7.30 Red 7.30 6.35 Black 6.35 0.0
Travel-friendly shape puzzle with a PETG storage box. Keeps pieces safe! Compatible with original game cards.
Vegetable Slicer Organizer for: https://www.vevor.com/french-fry-cutter-c_11660/vevor-commercial-chopper-commercial-vegetable-chopper-w-4-blades-fruits-dicer-p_010148712974 Pegs are located 95.5 mm side to side from each other on center.…
KIND REMINDER: If you plan to build in this case, please make sure to read the full description as it may contain important details affecting your specific building plans. Unique looking Micro-ATX case designed specifically to be both…
Use it as an indoor plant ornament or toy. Print-in-place with no supports. PLA suggested @ 15% infill & 0.2 layer height.
Ready to print, no supports. Thanks to fns270 for the great design! Go check out his other models. fns720: https://www.printables.com/@fns720
There are loads of Garmin interfaces out there, but (in my opinion) they all fail for one of two reasons: the intended print orientation is horizontal, thus mandating support structures that are difficult to remove and leave residual…
This is a lens cap which attaches to the bayonet mount (lens hood mount) of my Nikon AF-S DX Nikkor 18-70mm lens while the Hoya 67mm Pro 1 Digital UV Filter is still attached. I believe it should also work with the following cameras (and…
Supportless tabletop miniature of Xanthe, an elder elven druid from Heroes of the Borderlands. Ancient elf with long white hair, leaf-covered robes and a wooden staff with a crystal. Designed for FDM printing without supports – upright…
Friendly Valentines Heart - Ferrero Rocher & Baci sizes included. Share a picture if you print one!
I needed a way to mount my Harbor Breeze Solar node to the exterior of my apartment as high as possible without drilling into the brick. I decided to make this mount that hooks onto the top of the window. I have also added a small command…
This simple yet functional weaving shuttle is designed especially for children's weaving looms. With smooth rounded edges and a lightweight form, it's the ideal tool to introduce young crafters to the basics of weaving and textile work.…
This is a clip-on plotter mount designed specifically for the Ender 3 V2 that allows you to add a pen/plotter attachment without interfering with the hot end assembly, CR Touch, or BL Touch. Most existing plotter mounts assume a stock hot…
A soft, friendly moth design with fluffy proportions and simplified wings for reliable printing. Powered by MakerWorld – Image-to-3D ( https://makerworld.com/makerlab/imageTo3d )
This is a Fallout-style shelter sign designed from scratch in CAD and intended as a clean, wall-mounted decorative piece. I originally made this for a friend and am sharing it for anyone who wants a classic retro-apocalypse sign for their…
Never miss a delivery again! This house number plate is specifically designed for maximum visibility and durability. Whether you have a long last name or need to display two different families, this plate provides ample space without…
Printable player board for Elder Sign to keep your area tidy and gameplay faster. Ideal as an elder sign upgrade for a cleaner table setup.
Here is a fully printable model of a Backgammon set, including the board, checkers (chips), and dice. The design is optimized for multicolor printing systems and fits comfortably on smaller print beds. ✨ Key Features: Multicolor Ready:…
Rain Catcher With Ruler Braille Designed per 10 SQ CM Braille Friendly Induces Braille.
A simple set of dyslexia-friendly letters (30 mm) made using OpenDyslexic font. To be used with 3×2 mm magnets.
Fiz este dinossaurinho para uma aula de Blender do curso de Gustavo Rosa, recomendo! Imprima com suporte! I made this little dinosaur for a Blender class at Gustavo Rosa's course, I recommend it! Print with support! Category: Sculptures
A stylized Paladin figurine designed specifically for FDM 3D printing. This model features chunky details and optimized angles to ensure a successful print with minimal effort. Perfect for tabletop gaming or as a desk mascot.
Kapton tape dispenser designed to be used with tweezer. There is tiny groove on each "arm" allowing easy cutting with knife. Spacing is 25mm. 4 different widths: 5mm, 10mm, 15mm, 20mm. Each set need: - M3 nut (x2) - M3x16 screw (x2) //…
Files STL – universal (any slicer/printer) 3MF (Bambu/Orca) – ready-to-print starter profile (0.4 / 0.20 / tree supports) Tools used Created with Make My Statue from MakerWorld ( https://makerworld.com/makerlab/makeMyStatue )…
Files STL – universal (any slicer/printer) 3MF (Bambu/Orca) – ready-to-print starter profile (0.4 / 0.20 / tree supports) Tools used Created with Make My Statue from MakerWorld ( https://makerworld.com/makerlab/makeMyStatue )…
Files STL – universal (any slicer/printer) 3MF (Bambu/Orca) – ready-to-print starter profile (0.4 / 0.20 / tree supports) Tools used Created with MakerWorld-printU ( https://makerworld.com/makerlab/printU ) Compatibility & scale 100%…
Files STL – universal (any slicer/printer) 3MF (Bambu/Orca) – ready-to-print starter profile (0.4 / 0.20 / tree supports) Tools used Created with MakerWorld-printU ( https://makerworld.com/makerlab/printU ) Compatibility & scale 100%…
Files: STL – universal 3MF (Bambu/Orca) – ready “watertight” profile Tools used: Created with MakerWorld-Make My Vase ( https://makerworld.com/makerlab/makeMyVase ) Recommended watertight settings: Nozzle: 0.4 mm Layer height: 0.20 mm…
***See the " Differences of the remix compared to the original" down below for changes/improvements. This modification limits the hinge rotation to 125 degrees in order to drastically improve hinge sturdiness. This does not inhibit its…
Description Most razor holders are afterthoughts — a plastic clip, a suction cup, a sad little tray. The Confrontation Hare is none of those things. This is a fully sculpted figure, designed from the ground up to hold and charge the…
This is a 250 ml rounded dessert bowl designed specifically for FDM 3D printing . The original goal was to create a bowl inspired by soft, organic dessert cup shapes, while keeping it practical for printers like the Bambu Lab A1 and…
Ces dominos sensoriels ont été spécialement conçus pour les enfants afin de stimuler le toucher, la reconnaissance des formes et l’éveil sensoriel tout en jouant. Chaque pièce propose des textures différentes, permettant une approche…
Memory Sensoriel Découvrez un memory sensoriel pensé pour les enfants, alliant jeu, découverte et stimulation tactile. Ce jeu a été conçu pour être accessible à tous, y compris aux personnes aveugles ou malvoyantes, en mettant l’accent…
My girlfriend really liked the original model, but printing it was a nightmare every time. After another unsuccessful print, I decided to remake the model, preserving the main features of the original. I kept the original dimensions, but…
Licker in an attack pose, designed to be printed as a single piece. This model features a flat surface for easy printing. See below for recommended print settings. Thanks for stopping by :) Model for personal use only. NO comercial use.…
This remix of @Lite's waterfall faucet extension is designed to work without any screws or nuts. You just need a regular zip-tie if you want a permanent solution. Or if you want a temporary solution that you can take on/off on demand, you…
printed in 25mm scale 0,15layer Have fun paint just black the wood in brown and some Black green for the Bushes OR use entire Black and then drybrush some white on it !! PLEASE SEE and LIKE some Other stuff the Students made HERE !!!
Design Concept 🔥 UNDERWORLD THRONE – FDM FRIENDLY BAS-RELIEF Bring the power of the underworld to your print bed. This highly detailed bas-relief captures a dark ruler seated on a monumental throne, surrounded by fallen warriors, skulls,…
Monopoly Houses & Hotels – Simple, Clean FDM Prints A clean, easy-to-print set of Monopoly-style houses and hotels designed specifically for reliable FDM printing. These models are optimized for smooth surfaces, consistent detail, and…
A minimalist, cloud-shaped holder for Japanese kamifuda (ofuda) shrine talismans. Designed specifically for renters — it mounts to the wall using a standard stapler opened to 180° (tacker mode), so no drilling, nails, or adhesive tape are…
Give bees and other small insects a safe place to drink with this elegant flower-shaped insect watering station. Designed to mimic a delicate blossom, it blends beautifully into any garden while serving an important purpose. The shallow…
You can print it in PLA or PETG, mine is PETG. To install the headband, start by removing the clips that go inside the headband's loops. Then heat a loop using your printer's heatbed (or some other method) until it's pliable enough. Then…
I needed a way to hold my door open enough to allow my cat in and out while giving her peace from the dogs. It holds the door open at 18.22 degrees and is fit for doors roughly 1.5" thick. (It will work on smaller doors) I have assembly…
XDA profile keycap set, Spades suit theme, numeric keys 1–9, designed for mechanical keyboard use. Uniform XDA profile across all caps with a flat top, gently rounded square edges, and clean low-profile geometry. Each keycap should be…
🛠 Revamp Your Chairs with the Perfect Fit! 🛠 Say goodbye to scratched floors and noisy chairs with the Universal Chair Leg Cap ! This 3D printable model lets you create your own replacement caps, designed specifically for saloon chairs,…
Mounting surface is 30mm x 20 mm, while the hook is 10mm x 7mm - with a depth of 8mm. 45 degree chamfer allows it to be printed without supports. Printed with 10% infill and 3 walls. Tolerance of 0.2mm. Hook sits a little further out, but…
Intro Never worry about forgetting your coin again! This 3D-printable 1 € trolley coin lets you unlock supermarket shopping carts without needing real money. It’s designed to be easy to print and uses less filament than most other trolley…
This is Mini VogMan - the chubby-cheeked, thumbs-up, always-positive maker sidekick from the VogMan universe. Whether he’s cheering you on in a build or making a surprise cameo in a YouTube video, Mini VogMan is the printable embodiment…
Ninja Star (Shuriken) fidget spinners and stand! There are two versions of the model - the one with name “Rounded Corners” is the kid friendly version. I've also included the model for the stand that is shown in the photos - which makes…
I was not able to print the fume extractor adapter I designed on my 220x220 printer so split into 3 parts. Juuuuust fits on build plate. Doesn't need glue, but it couldn't hurt either. For 4" vent hose. Printed in PETG 15% gyroid infill 3…
ive got the happiest and friendliest pitbull, yet everyone runs the moment they see her, so i figured id give them a sweeter warning. Category: Other
This case-friendly Standby Mode dock is designed for the iPhone 15 Pro Max model. It is based on Scott Yu-Jan's design , but this design does not support AirPods case charging capability. This design is slimmer and more minimal which…
Statue of St. John Nepomucene (of Nepomuk), protector from floods and drowning. The last few days have been disastrous for a big part of central Europe. Heavy rains across Austria, the Czech Republic, Poland and Romania turned the streams…
RECHARGEABLE AND ECO-FRIENDLY SOLAR LIGHT,USED FOR EMERGENCY. RECHARGEABLE AND ECO-FRIENDLY SOLAR LIGHT FOR EMERGENCY. MATERIALS: 1 SOLAR PANEL 5V 500mAh 2 li-ion battery 3,7v 2000mA 1 PCB FOR RECHARGED LI-ION BATTERY 1 INTERRUPT 1 LED…
This is a single .3mf file containing parts for a Casper the Friendly Ghost halloween magnet. If your slicer offers to convert the object's scale to millimeters, say no. The object is already in millimeters. If it asks to import as a…
This is a remix of ctyler2621's SFIC holder. There are a few reasons for the remix which I feel improves on the original (awesome) design: The recess that the SFIC locking lug goes into wasn't deep enough for some of my SFIC locks. So I…
Behold the Gelatinous Cube, the silent janitor of the dungeon world! This transparent terror glides through corridors, absorbing everything in its path with the grace of a particularly hungry vacuum cleaner. Don’t be fooled by its jiggly…
This version of the original "Buddy the Pug" by Josef Prusa is modified to be printed in two parts, giving you the opportunity to add some color and make Buddy even cuter! The model is split into two sections: one for the main body and…
This is a modification of Scott Yu-Jan's iPhone Standby Dock, with the addition of another Apple Watch Puck, to fit 3 devices: iPhone (all non-max models) , Apple Watch, and Airpods, permitted they all use MagSafe. This is his…
Went ahead and redesigned this to be more installer friendly by adding an indentation for your finger. Category: Parts
Behir, the thunderous terror of the caverns! This serpentine monstrosity is a master of ambush, lurking in the shadows with its twelve clawed legs ready to strike. With the power to unleash a devastating bolt of lightning, it electrifies…
While walking through Porto Rotondo in the northern part of Sardinia , I came across a beautiful structure of lizard, which I often saw on the walls of nearby buildings. I decided to redraw it into a digital version in Procreate and than…
This 3D model is designed for easy printing and requires no supports, making it accessible for all skill levels. Even if you don’t have a multi-material setup (AMS), this model is perfect for painting! Simply print it using white matte…
We had this Anker Power strip/surge protector on our dresser, where I became a cluttered mess of electronics and cables. So I designed this mount so that it can be mounted onto the side of the dresser where the plugs and cables wouldn't…
The Original Light Strip kept Crashing with the PTFE Tube of my MMU So i added 5cm Lenght to the Arms so it has more Space for the PTFE Tube. These are only the Arms of the Light Bar. You can find the Bar here:…
My mom wahted to make this simple 3D-printed reading guide designed to assist individuals (especially those learning how to read or with ADHD), in improving focus and reducing distractions while reading. It helps guide the eyes along…
Transform your old glass and plastic bottles into stylish and functional pieces with this 3D printable shell/protective cover! Designed for bottles around 70mm in diameter, this project is perfect for anyone looking to add a touch of…
Just another stand for your significant pixel 8 device :) Case friendly Apple magsafe compatible(made 58mm socket diameter instead 56mm magsafe for some chinese qi charger compability) 15-20% infill Organic support only from building…
You can get very inexpensive wireless charging boards from Ali Express that work just fine with apple products. It might not be as fast as the expensive Apple one, but they work exactly the same way. The disk slides into the charging…
Just another stand for your significant Pixel 8 PRO device :) Ajusted version of pixel 8 stand https://www.printables.com/model/1065160-pixel-8-magsafe-case-friendly-charging-stand Case friendly Apple magsafe compatible 15-20% infill…
This model is intended for a child friendly soldering project where childeren learn soldering, circuits and LED's. For instructions, see:
This insert stores the basic components of the Bomb Busters game, while the advanced components are stored in their cardboard boxes. It is designed so that the box can stand upright without the need for lids. The model features a special…
I'm not confident with Slicers other than Cura, but loved RedWish's design, so I remade it to have the hexagonal mesh pre-made and ready to slice in Cura, no extra steps needed.
Demonstration of the operation of a 3D scanner based on a finished product
improved scan of Leonardo DiCaprio's face using a neural network (Test)
Print Details: 3D Printer: Creality K1C Print Material: Hyper PLA Print Settings: Standard 0.4mm nozzle with default settings. Print Support Required: Yes Print Duration: 1h 45m 2s Dimensions: a. Model Dimensions Slot Height: 18.8mm Top…
A flat clip for holding flat stuff together. Takes like 1g of filament with a 5 minute print time. I recommend printing it all perimeters/100% infill. Scales nicely, so if you need one for larger/thicker things simply print it…
Better stars for less drooping first layers on the snowflakes. Box is scaled to 150%
![Hair band [print-friendly remix]](https://media.printables.com/media/prints/09efffe1-b6da-46e5-a876-d9f3d2528173/images/12373384_257767c3-8b24-467e-ab31-8424fb6a6927_d5cf0349-8fcd-467f-b15f-0d9be213405b/hair-band.png)
