1 / 5
S10 Lower Ball Joint Boot (TPU)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement boot for a lower ball joint for my 1997 Chevy S10 2WD
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 34
- Makes
- 0
- Views
- 378
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
I was doing some suspension work on my 2WD S10 and noticed that the OEM ball joint boot had split. The joint itself was still tight and moved freely so I modeled this up and printed in TPU 95 so I could get things reassembled.
Dimensions of boot:
48mm base diameter
17mm pin diameter
48mm tall
Print Settings:
0.6mm nozzle
0.44mm layer height
3 perimeters
Print with small side touching build plate to avoid need for supports