Hinge for Audio-Technica AT-LP120 turntable dust cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
AT-LP120 turntable dust cover hinge. Needs 3mm pin, 8mm spring & metal washer
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 47
- Makes
- 0
- Views
- 261
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Public Domain
This is an almost exact replica of the original hinge.
You'll need a 3mm pin, a spring with a diameter of 8mm or less (the stiffer, the better - the original spring is very stiff), and any metal washer/spacer above the spring to create a friction pair between the plastic parts. I used a ground-down piece of a bolt, but you can use a thick nut or something similar.
The models are already oriented to produce the strongest parts, but you'll need supports in this orientation (only on the build plate).
I printed this with 3 walls, 100% infill, and 0.08mm layer height on a 0.4mm nozzle - but only to make my wife happy :D You can definitely print with fewer walls and lower infill for a perfectly functional part.