Waveshare CM5 IO Board Case (2‑Part, Fan‑Ready)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric 2‑part case for Waveshare CM5 IO Board with 30 mm fan, vents, and rear cutouts.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 81
- Makes
- 0
- Views
- 353
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
This enclosure is designed for the Waveshare Raspberry Pi Compute Module 5 IO Board, with a design similar to the official Raspberry Pi CM5 case. It consists of a base and lid, fastened with M2.5 screws and heat‑set inserts. The lid includes a 30 mm fan opening with a grill, and the rear has cutouts for HDMI, stacked USB‑A, Ethernet, USB‑C and LED holes.
Side vents are only on the wall opposite the cutouts to guide airflow through the case.
Notes / Recommendations:
- Heat‑set inserts: M2.5 × 5 mm length × 3.5 mm
- Screws: M2.5
- Fan: 30 mm, 24 mm mounting hole spacing