1 / 3
Raspberry Pi camera ribbon cable clip to MK2/MK3 x-axis stepper cable
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I remixed Andreas Gohr's “Tiny Raspberry Pi Camera Ribbon Cable Clip” so the 1m ribbon cable of my x-axis mounted pi...
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 52
- Makes
- 1
- Views
- 429
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I remixed Andreas Gohr's “Tiny Raspberry Pi Camera Ribbon Cable Clip” so the 1m ribbon cable of my x-axis mounted pi camera could be attached nicely to the cable of the x-axis stepper for better cable management as shown in the pictures. My design features another circular clip with a diameter of about 5.8mm that fits on the stepper cable of the MK3's x-axis. I'm quite sure it's applicable for rods etc. that share a similar diameter.
Print on the small edges with no support. Brim is required.