1 / 2
print-in-place Landing skids for DJI Mini 2, Mini 4K drone [UPDATED] — image 1
1 / 2

print-in-place Landing skids for DJI Mini 2, Mini 4K drone [UPDATED]

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

print flat transport flat, folds into mountable configuration with detent to keep assembled, squeeze skids to mount.

Rating
5 / 5
Likes
86
Downloads
582
Makes
1
Views
1,667
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

This is a 5 gram skid for use on a DJI Mini4K or Mini 2 lightweight drone.  The skids weigh 5 grams and print easily; I used ASA but PETG or PLA should work too.  The skids keep the props from mowing the grass when taking off and landing.

[UPDATE: After extensive trials including child participants, I updated the design so that the brace stays together better.  Also, a friend ran our drone into a tree and broke one of the skids, so why not improve the design before re-printing it? ]

You can mount them unassembled and then place the brace in place to secure the skids, or you can pre-assemble it and then squeeze the skids to separate the tabs that go into the slots in the drone.  Taking them off is the reverse.  Because you can mount/unmount the skids by squeezing them, you could glue the brace to the skids if you didn't have any desire to disassemble it later.

Tags