Macbook Pro Stand
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.57 – €1.91 net (excluding VAT)
For file: macbook_stand_axis.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.74 excluding VAT (range midpoint).
- Weight reported by the author
- 22 g
- Print time reported by the author
- 1.73 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A Stand for a Macbook Pro (or most other laptops), Printable on the Prusa Mini !
- Rating
- 4.727 / 5
- Likes
- 104
- Downloads
- 1,014
- Makes
- 13
- Views
- 5,664
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Public Domain
Hi,
there are many laptop stands out there, this is my take on it. It is printable on a Prusa Mini (you will have to print all parts seperately). Can be printed with standard PLA, 0.4mm nozzle and 0.2 mm layer height and of course no support is needed.
I tested it for my 14' Macbook (2021) but I guess it works for most other notebooks as well. The distance between the two holders is 18 cm, so plenty of room for most trackpads.
For a full stand you have to print
- 2x Stand
- 2x Axis
An then just click them together. For protection of the laptop, i recommend some cloth or similar into the hooks below, in order to protect the laptop from getting scatched.
Enjoy !