Macbook Pro Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Stand for a Macbook Pro (or most other laptops), Printable on the Prusa Mini !
- Ocena
- 4,727 / 5
- Polubienia
- 104
- Pobrania
- 1013
- Wydruki
- 13
- Wyświetlenia
- 5660
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
Hi,
there are many laptop stands out there, this is my take on it. It is printable on a Prusa Mini (you will have to print all parts seperately). Can be printed with standard PLA, 0.4mm nozzle and 0.2 mm layer height and of course no support is needed.
I tested it for my 14' Macbook (2021) but I guess it works for most other notebooks as well. The distance between the two holders is 18 cm, so plenty of room for most trackpads.
For a full stand you have to print
- 2x Stand
- 2x Axis
An then just click them together. For protection of the laptop, i recommend some cloth or similar into the hooks below, in order to protect the laptop from getting scatched.
Enjoy !