Nibble Zero (Retia) Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cute case for the Retia Nibble Zero. Protect your newest Meshtastic/MeshCore node in style!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 215
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Cute case for the Retia Nibble Zero.
Designed for the variant without the soldered on antenna on one of the ears. I've included all step files though so feel free to modify
The model consists of 4 pieces:
Body
Lid
2x Buttons
4x Buttons
Assembly doesn't require any glue or any other components, however it can be a bit fiddly with the button inserts. I recommend putting the button inserts in place, there is only 1 way to insert each. Then tilt the case downward so gravity holds the button inserts in place. Finally, insert the Nibble Zero with the USB-C end first as the port itself sticks out a bit past the PCB and must slot into the opening for it in the case first. After you've got the Nibble Zero in and the USB-C port and buttons aligned, the PCB itself will hold the button inserts in and you can simply snap in the lid. It should all feel / fit pretty solidly after going together.
I was worried about the USB-C port not having enough clearance on the outside, between the two protrusions for the cat's "feet", however, almost all of my USB-C cables have fit without issue.