Hypercube Rear Bed Bracket with Integrated Lead Nut Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've had my thoughts on creating this for a bit. Once I upgraded the z axis rods on the Hypercube from 8mm to 12mm, I…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 40
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I've had my thoughts on creating this for a bit. Once I upgraded the z axis rods on the Hypercube from 8mm to 12mm, I think it was time to do so.
This item does a number of things: -Reduces total number of purchased parts -Reduces total number of mount points from 11 to 4 -Increases rigidity -Perfectly vertically aligns the bed mount points to both the lead screw and 12mm axis rods -Reduces guesswork in alignment
To align bracket: -Place Y 2020 extrusions flat against end of bracket -Ensure ends are aligned correctly -Tighten down -Done
I've also created a front bracket which squarely aligns the front of the bed frame. Use it with this. https://www.thingiverse.com/thing:2247321
Well, I just added this one, I remixed the z carriage to have a flat end. This will make it easier to align everything up. https://www.thingiverse.com/thing:4411536
Thanks, all! Jae
Print Settings
Printer:
Hypercube
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.15
Infill:
45
Category: 3D Printer Parts