[Hot swappable] Jonsbo NV10 Back Panel 200mm Fan Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
10mm magnets (may require a bit of pressing down for materials like ABS), turns the back panel into intake/exhaust
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 484
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- GNU General Public License v3.0
The holes line up for the back holes, there are 10mm holes left for the magnets, there is one required for each screw, 2 for the top, and 2 for the bottom, totaling 8. The fan and case both have magnetic screws, which is the primary method of attachment. When printing with ABS, you may have to use some more force to fit the magnets in, as the plastic shrinks at different rates when cooling.
Do not transport the machine with this attachment unless you have secured it via other means. The magnets are simply to allow for quick and easy attachment and detachment, allowing it to be taken on the go, I recommend keeping the back panel as a spare in case you need to pack it for travel.
