Self-Watering Planter
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€7.69 – €9.40 net (excluding VAT)
For file: Pot 3_Self Water_3in (2 Count).gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.54 excluding VAT (range midpoint).
- Weight reported by the author
- 137 g
- Print time reported by the author
- 7.1 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A sleek 3-inch pot for your water-loving babies. Also great for propagating new plants!
- Rating
- 0 / 5
- Likes
- 47
- Downloads
- 175
- Makes
- 0
- Views
- 1,368
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
* Requires string or other wicking material
Print with at least 10-15% infill on the bottom of both files for good bridging. Does fantastic with my 0.6mm nozzle with 0.4mm layer height. Seam ‘nearest’ should get all of them in the corners.
Some plants will not like this environment as it will never dry out unless you don't refill it. Not the best for cacti and other related plants.
Just loop the wick through the holes and fill up the base, and your plant is good to go! Don't forget to check the reservoir every now and again (;
*Included G-Codes to quickly print 2 of them on a Prusa Mini
And Please, post a make!